Abstract:Benzidine (Bz) was used to modify the nanofiller, manganese dioxide (MnO2), and the resulting Bz/MnO2 was then encased in pure epoxy resin (EP) with graphitic carbon nitride (GCN). The effectiveness of epoxy-coated mild steel in protecting against varying concentrations of GCN/Bz-MnO2 was assessed through the use of electrochemical techniques in natural seawater. The flame retardancy capabilities of the epoxy coating were significantly improved by the incorporation of GCN/Bz-MnO2. The EP-GCN-Bz/MnO2 nanocomposites display peak heat release rate (PHRR) and total heat release (THR) values which are 79 % and 62 % lesser than that of pure EP, respectively. When compared to a pure epoxy coating, the results of salt spray tests indicated that the addition of GCN/Bz-MnO2 improved corrosion protection and decreased water absorption. Electrochemical impedance spectroscopy (EIS) studies showed that the epoxy-GCN/Bz-MnO2 coating still had an improved resistance of 6.40E10 Ω.cm2 even after 30 days of exposure to seawater. Scanning electrochemical microscopy (SECM) displayed lowest ferrous ion dissipation (1.0 I/nA) in the EP-GCN/Bz-MnO2 nanocomposite coated steel. Potentiodynamic polarization testing showed that EP-GCN-Bz/MnO2 had a lower current density (i corr: 0.03 µA/cm2) in comparison with other coatings. This is mainly because the Bz alteration of the MnO2 nanoparticles and their successful coordination with GCN sheets result in a noticeably more compact nanostructure that lowers aggregation and increases binding capacity. Surface-modified GCN was found to be improved in its breakdown products, leading to the production of a strong, inert nanolayered covering, according to Scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDX) analysis. Water contact angle (WCA) of 160° demonstrates the exceptional water resistance of the recently developed EP-GCN/Bz-MnO2 coating. In terms of hardness and adhesion strength, Bz/MnO2 wrapped in GCN had good mechanical characteristics on the epoxy substrate. The improved adhesive strength (18.3 MPa) for mild steel coated with EP-GCN/Bz-MnO2 was attained prior to being immersed in seawater. The EP-GCN/Bz-MnO2 crystallizes form a robust, inert coating that prevents ions from accessing the specimen. The coating has increased adhesive strength as a result, and it can withstand deep immersions without losing its integrity. Hence, the EP-GCN/Bz-MnO2 nanocomposite might work as a useful coating component in the automotive industry.

Nanocomposite coatings based on graphene and siloxane polymers deposited by atmospheric pressure plasma. Application to corrosion protection of steel

Hydrophobic Al2O3/SiO2/PDMS Composite Coatings for Anti-corrosion Application of 304 Stainless-Steel

Studies on nano-hybrid biopolymer composite coating on corroded steel to improve the corrosion resistance and hydrophobicity of the surface

Novel multilayer structural epoxy composite coating containing graphene oxide and silanized chromium carbide for the protection of steel structures

Polydimethylsiloxane-graphene oxide nanocomposite coatings with improved anti-corrosion and anti-biofouling properties

Plasma sprayed graphene reinforced titanium nitride composite coating: An effective solution for mitigating the corrosion attack

Novel multifunctional nanocomposites containing graphitic carbon nitride/silanized Nb2O5 nanofillers for the protection of steel surfaces in the automobile industry

Effect of layer-by-layer synthesized graphene–polyaniline-based nanocontainers for corrosion protection of mild steel

Multifunctional graphitic carbon nitride/manganese dioxide/epoxy nanocomposite coating on steel for enhanced anticorrosion, flame retardant, mechanical, and hydrophobic properties

Corrosion protection performance of silicon-based coatings on carbon steel in NaCl solution: a theoretical and experimental assessment of the effect of plasma-enhanced chemical vapor deposition pretreatment

Waterborne Eco-Sustainable Sol-Gel Coatings Based on Phytic Acid Intercalated Graphene Oxide for Corrosion Protection of Metallic Surfaces

Designing functionalized graphene-stitched-SiC/fluoropolymer novel composite coating with excellent corrosion resistance and hydrogen diffusion barrier properties

Fabrication of eco-friendly graphene-based superhydrophobic coating on steel substrate and its corrosion resistance, chemical and mechanical stability

Photopolymerization of Coating Materials for Protection against Carbon Steel Corrosion

Synthesis of poly(p-phenylenediamine) encapsulated graphene and its application in steel protection

State of the art and current trends on layered inorganic-polymer nanocomposite coatings for anticorrosion and multi-functional applications

One-Step Spraying Strategy for Fabricating Bioinspired, Graphene-Based, and Multifunctional-Integrated Coatings on Structural Steel with Good Water Repellency, Fireproofing, Anticorrosion, and Durability

Graphene derivatives as reinforcement in coatings based on epoxy and silane for enhancing its corrosion resistance – A latest advances review

Graphene-reinforced epoxy powder coating to achieve high performance wear and corrosion resistance

Robust, hydrophobic anti-corrosion coating prepared by PDMS modified epoxy composite with graphite nanoplatelets/nano-silica hybrid nanofillers

Polypyrrole-based nanocomposites doped with both salicylate/molybdate and graphene oxide for enhanced corrosion resistance on low-carbon steel