Abstract:This study focuses on optimizing the thermal, morphological, scratch resistance, and anti-barrier characteristics of newly developed hybrid sol-gel coatings. The coatings were formulated by varying the synthetic precursors and incorporating a clay additive. The hybrid coatings were prepared using a mixture of organosilane and zirconium propoxide precursors, and further modified with polydimethylsiloxane (PDMS) and Cloisite 20 A (C20A) clay additives. The coatings were applied onto mild steel substrates and their corrosion protection in 3.5 wt% NaCl solutions were evaluated through electrochemical and visual observation testing. Contact angle measurements revealed a hydrophobic nature of the developed coatings on the steel surfaces, primarily attributed to the presence of an organosilane precursor with a long C18-alkyl chain functionality in all formulations. Electrochemical testing data demonstrated that the coating formulation containing the polydimethylsiloxane precursor exhibited good corrosion protection. After 14 days of immersion in a saline medium, this sample exhibited impedance values higher than 10 6 Ω.cm 2 and a low corrosion rate of 3.5 × 10 −3 mpy, as determined by electrochemical impedance spectroscopy (EIS) and polarization testing, respectively. Morphological analyzes confirmed the homogeneous and integrated coating layer of this sample, which contributed to its enhanced corrosion protection. Furthermore, the inclusion of the Zr-propoxide precursor in a formulation containing only silane precursors demonstrated favorable effects on the desired coating properties. The hybrid sol-gel coatings exhibited excellent anti-barrier characteristics, which can be attributed to the formation of highly cross-linked Si-O-Si networks. Overall, the reported hybrid coating formulations offer promising alternatives to commercially available toxic conversion coatings, as they exhibit excellent anti-barrier properties and can be considered environmentally friendly.

Hybrid Organosilicon-Metal oxide Composites and their Corrosion Protection Performance for Mild Steel in 3.5% NaCl Solution

Synthesis of hybrid organosilicon materials of various chemistries as efficient protective coatings for mild steels in NaCl media

Hydrophobic Al2O3/SiO2/PDMS Composite Coatings for Anti-corrosion Application of 304 Stainless-Steel

Enhanced corrosion inhibition of low carbon steel in aqueous sodium chloride employing sol–gel-based hybrid silanol coatings

Effect of hydrophobicity in hybrid sol-gel coating for enhanced barrier property on mild steel

Development of silane/acrylate-based hybrid polymer coating through sol–gel technique for anti-corrosive application

Characterization of Polyorganosilazane-Derived Hybrid Coatings for the Corrosion Protection of Mild Steel in Chloride Solution

Preparation of Sol-Gel Derived Anticorrosive Coating on Q235 Carbon Steel Substrate with Long-Term Corrosion Prevention Durability

Robust Superhydrophobic SiO2/polydimethylsiloxane Films Coated on Mild Steel for Corrosion Protection

Synthesis of vinyl trimethyl silane and acrylic acid modified silica nanoparticles as corrosion inhibition protocols in saline medium

Effectiveness of Epoxy Coating Modified with Yttrium Oxide Loaded with Imidazole on the Corrosion Protection of Steel

New approach for processing chitosan as low cost protective hybrid coating for C-steel in acid media

Corrosion-resistant performance of mild steel employing flavonoids and phenols-rich Beta vulgaris extract-doped hybrid sol-gel coatings

Tailoring poly(2-ethyl-2-oxazoline) towards effective mitigation of chloride-induced dissolution of S235JR steel: The synergistic contributions of potassium iodide and myristyl trimethylammonium bromide

Effect of Incorporating MoS2 in Organic Coatings on the Corrosion Resistance of 316L Stainless Steel in a 3.5% NaCl Solution

Highly durable macromolecular epoxy resin as anticorrosive coating material for carbon steel in 3% NaCl: Computational supported experimental studies

Studies on nano-hybrid biopolymer composite coating on corroded steel to improve the corrosion resistance and hydrophobicity of the surface

Preparation and characterization of anticorrosion Ormosil sol–gel coatings for aluminum alloy

Halloysite nanotubes-enhanced epoxy acrylate latex emulsion as a novel anticorrosive protective coating for metal surface in 3.5% NaCl solution

Hybrid epoxy–silane coatings for improved corrosion protection of Mg alloy

Hybrid Zinc Coatings with Chitosan/Alginate Encapsulated CuO-Nanoparticles for Anticorrosion and Antifouling Protection of Mild Steel