Abstract:Unlike the deposition of silica nanoparticles , the functionalization of a surface by silanization requires the condensation of precursors near the surface. Pulsed cathodic electrophoretic deposition (pulsed-CEPD) allows, through water reduction, such condensation by locally increasing pH on the cathode, and, simultaneously, a greater control of hydrogen formation. This is useful specially regarding dielectric materials . In this sense, pulsed-CEPD was used for the sealing and silanization of unsealed anodized AA2024 from a silane-ethanol-water suspension. Two pulse widths were evaluated and their impact on the deposition were verified by FTIR, XPS, and contact angle measurements. Additionally, electrochemical impedance spectroscopy (EIS) was performed to evaluate the sealing process and to verify possible changes caused by the application of the cathodic potential during film formation. The results indicate that pulsed-CEPD allows the silanization despite the high voltage demanded by anodized aluminum . The shorter pulse width provided the most hydrophobic surface . FTIR spectra displayed all distinctive bands of an organically functionalized silicate structure. A model of the coating's chemical structure is suggested based on XPS results. EIS results obtained over 168 h in NaCl 0.6 M show higher impedance moduli for specimens prepared by the shortest pulse width. Equivalent circuit models and their physical meaning are proposed. From the results, it is possible to observe that the shorter pulse width increased the impedance moduli, and, therefore, provided better protection against corrosion.

CATHODICALLY ELECTROCHEMICAL-ASSISTED DEPOSITION AND PROTECTIVE PROPERTIES OF SILANE FILMS

Electrodeposition of silane films on aluminum alloys for corrosion protection

Preparation of Dtms Films on Ly12 Aluminum Alloys Via Electrochemical Deposition and Their Anti-Corrosive Performance

STUDIES OF SURFACE TREATMENT OF ALUMINUM ALLOYS BY BTSE SILANE AGENT

Effects of Electrodeposition Potential on the Corrosion Properties of Bis-1,2-[Triethoxysilyl] Ethane Films on Aluminum Alloy

Electro-Assisted Preparation of Dodecyltrimethoxysilane/Tio2 Composite Films for Corrosion Protection of Aa2024-T3 (aluminum Alloy)

Electrodeposition of protective organosilane films from a thin layer of precursor solution

Improved Corrosion Protection of Aluminum Alloys by Electrodeposited Silanes

Developing A Well-Adhered Ni/P Alloy Film On The Surface Of Silicone Elastomer For Shielding Electromagnetic Interferences

Electrodeposited Silica Films Post-Treated with Organosilane Coupling Agent As the Pretreatment Layers of Organic Coating System

Improving the formation and protective properties of silane films by the combined use of electrodeposition and nanoparticles incorporation

Robust Superhydrophobic SiO2/polydimethylsiloxane Films Coated on Mild Steel for Corrosion Protection

Electrodeposited Superhydrophobic Mesoporous Silica Films Co-Embedded with Template and Corrosion Inhibitor for Active Corrosion Protection

Anti-corrosion Performance of LY12 Al Alloy Reinforced by Anodic Oxidization and Silanization

Corrosion resistance of anodically oxidized LY12 aluminum alloy after modification with cerium nitrate and silane

Changes of Corrosion Electrochemical Behavior of Cerium Nitrate Doped GPTMS/TEOS Silane Hybrid Films with Immersion Time

Understanding the Role of Silane Pretreatments in an Organic Coating System. Part 1: Corrosion Performance and Interfacial Property

PROGRESS AND PROSPECTIVE IN ELECTRODEPOSITED ANTI-CORROSIVE SILANE FILMS

Pulsed electrophoretic deposition for surface silanization of anodized aluminum from a silane-ethanol-water suspension

Electrodeposition of cerium (III)-modified bis-[triethoxysilypropyl]tetra-sulphide films on AA2024-T3 (aluminum alloy) for corrosion protection