Abstract:A highly integrated polystyrene (PS) microfluidic chip coupled to electrospray ionization mass spectrometry for on-chip protein digestion and online analysis was developed. The immobilized enzymatic microreactor for on-chip protein digestion was integrated onto microchip via the novel method of region-selective UV-modification combined with glutaraldehyde-based immobilization. The micro film electric contact for applying high voltage was prepared on chips by using UV-directed electroless plating technique. A micro-tip was machined at the end of main channel, serving as the interface between microchip and mass spectrometric detector. On-chip digestion and online detection of protein was carried out by coupling the microchip with mass spectrometry (MS). The influences of methanol flow rate in side channel on the stability of spray and intensity of signals were investigated systematically. Also the influence of sample flow rate on the performance of immobilized enzymatic reactor were investigated. Stable spray was obtained at the spray voltage of 2.8-3.0kV and the methanol flow rate of 500-700nLmin(-1) with the relative standard deviation (RSD) of total ion current (TIC) less than 10%. The influence of sample flow rate on the performance of immobilized enzymatic reactor was also studied. The sequence coverage of protein identification decreased with the increase of flow rate of the sample solution. A sequence coverage of 96% was obtained with immobilized enzymatic reactor at the sample flow rate of 100nLmin(-1) with the reaction time of 8.4min. It could detect cytochrome c as low as 10μgmL(-1) with the developed system. No obvious decrease in protein digestion efficiency was observed after the chip continuously performed for 4h and stored for 15d.

Rapid fabrication of microfluidic mixer chip by non-isothermal molding method based on resistance heating principle and its application in pesticide residue detection

Propidium Monoazide Pretreatment on a 3D-Printed Microfluidic Device for Efficient PCR Determination of ‘liveversusdead’ Microbial Cells

Fabrication of Fluidic Chips with 1-D Nanochannels on PMMA Substrates by Photoresist-Free UV-lithography and UV-assisted Low-Temperature Bonding

Development of Rapid and High-Precision Colorimetric Device for Organophosphorus Pesticide Detection Based on Microfluidic Mixer Chip

Fabrication of poly(methyl methacrylate) microfluidic chips by redox-initiated polymerization.

Injection molding and characterization of PMMA-based microfluidic devices

Reasearch and fabrication of integrated pneumatic microvalves in polymer microfluidic chip

Low-cost Fabrication of a Paper-Based Microfluidic Using a Folded Pattern Paper.

Fabrication of 1-d nanochannels on PMMA substrate by photoresist-free uv lithography and UV-assisted bonding under low temperature

Fabrication of PMMA microfluidic chips using disposable agar hydrogel templates.

Rapid and Simple Half-Quantitative Measurement Alpha-Fetoprotein by Poly(dimethylsiloxane) Microfluidic Chip Immunochromatographic Assay

Fabrication of Poly(methyl Methacrylate)(pmma) Microfluidic Chips by a Simple Hot Embossing Method

Fabrication of a polystyrene microfluidic chip coupled to electrospray ionization mass spectrometry for protein analysis.

Rapid Customization of 3d Integrated Microfluidic Chips Via Modular Structure-Based Design

Fabrication of Micro Pneumatic Valves with Double-Layer Elastic Poly(dimethylsiloxane) Membranes in Rigid Poly(methyl Methacrylate) Microfluidic Chips

Design and fabrication of a microfluidic detection chip

On-chip integrated multi-thermo-actuated microvalves of poly(N-isopropylacrylamide) for microflow injection analysis

Electrophoresis Microchips with Sharp Inlet Tips, for Contactless Conductivity Detection, Fabricated by In-Situ Surface Polymerization

Fabrication of poly(methyl methacrylate) capillary electrophoresis microchips by in situ surface polymerization.

Pump-Free Microfluidic Rapid Mixer Combined with a Paper-Based Channel

Fabrication of A Fiberglass-Packed Channel in A Microchip for Flow Injection Analysis