Abstract:Micro-flow channel is basic functional component of microfluidic chip, and every step-forward of its construction technique has been receiving concern all over the world. This article presents a notcomplicated but flexible method for fabrication of micro-flow channels. This method mainly utilizes the conventional molding capability of polydimethylsiloxane (PDMS) and widespread commercial microwires as templates. We have fabricated out some conventional types of microchannels with different topological shapes, as examples for the demonstration of this flexible fabrication route which was not dependent on the stringent demands of photolithographical or microelectromechanical system (MEMS) techniques. The smooth surface, high-intensity, and high flexibility of the wires made it possible to create many types of topological structures of the two-dimensional or three-dimensional microchannel or channel array. The geometric shape of the cross-section of thus forming microchannel in PDMS was the negative of that of embedded-in microwire, in high-fidelity if suitable measures were taken. Moreover, such a microchannel fabrication process can easily integrate the conductivity and low resistivity of the metal wire to create micro-flow devices that are suitable for the electromagnetic control of liquid or the temperature regulation in the microchannel. Furthermore some preliminary optical analysis was provided for the observation of thus forming rounded microchannel. Based on this molding strategy, we even made some prototypes for functional microflow application, such as microsolenoids chip and temperature control gadgets. And an experiment of forming a droplet in the cross channel further confirmed the feasibility and applicability of this flexible microchannel forming technique.

Fabrication of A Fiberglass-Packed Channel in A Microchip for Flow Injection Analysis

Optical Micro/nanofibre Embedded Soft Film Enables Multifunctional Flow Sensing in Microfluidic Chips

Fabrication and performance of fiber electrophoresis microchips.

Fabrication and Performance of Poly(methyl Methacrylate) Microfluidic Chips with Fiber Cores.

Fabrication of Fluidic Chips with 1-D Nanochannels on PMMA Substrates by Photoresist-Free UV-lithography and UV-assisted Low-Temperature Bonding

Fabrication Of Microfluidic Chip And Its Application

Fabrication of poly(methyl methacrylate) capillary electrophoresis microchips by in situ surface polymerization.

Fabrication of Micro/Nanofluidic Chip on Glass Substrate and Its Application for Electrokinetic Concentration of Proteins

Fabrication of Pmma Microchip of Capillary Electrophoresis by Optimized Uv-Liga Process

Fabrication of 1-d nanochannels on PMMA substrate by photoresist-free uv lithography and UV-assisted bonding under low temperature

Fabrication of poly(methyl methacrylate) microfluidic chips by redox-initiated polymerization.

Chemiluminescence micro-flow-injection analysis on a chip.

Fabrication of full glass chips with hybrid micro- and nanochannels and their application to protein concentration

Fabrication of PMMA microfluidic chips using disposable agar hydrogel templates.

Electrophoresis Microchips with Sharp Inlet Tips, for Contactless Conductivity Detection, Fabricated by In-Situ Surface Polymerization

Rapid Fabrication Of Poly(Methyl Methacrylate) Capillary Electrophoresis Microchips By In Situ Surface Polymerization

Novel Fabrication Technology Of Polydimethylsiloxane Microfluidic Chip

Fabrication of Poly(methyl Methacrylate)(pmma) Microfluidic Chips by a Simple Hot Embossing Method

Fast fabrication of PDMS microfluidic electrophoresis chip

PDMS Microchannel Fabrication Technique Based on Microwire-Molding

A Non-Photolithography Fabrication For A Microfluidic Chip Based On Pmma Polymer