Abstract:Incorporating Ag in kesterite materials is crucial for surpassing 13% efficiencies. However, it reduces the density of CuZn defects, resulting in a suboptimal majority carrier density near 1015 cm−3. This work provides a simple approach to tune the majority carrier density to optimal values over 1016 cm−3, leading to record‐level efficiencies above 14% and enabling efficiencies close to 20%. Kesterite photovoltaic technologies are critical for the deployment of light‐harvesting devices in buildings and products, enabling energy sustainable buildings, and households. The recent improvements in kesterite power conversion efficiencies have focused on improving solution‐based precursors by improving the material phase purity, grain quality, and grain boundaries with many extrinsic doping and alloying agents (Ag, Cd, Ge...). The reported progress for solution‐based precursors has been achieved due to a grain growth in more electronically intrinsic conditions. However, the kesterite device performance is dependent on the majority carrier density and sub‐optimal carrier concentrations of 1014–1015 cm−3 have been consistently reported. Increasing the majority carrier density by one order of magnitude would increase the efficiency ceiling of kesterite solar cells, making the 20% target much more realistic. In this work, LiClO4 is introduced as a highly soluble and highly thermally stable Li precursor salt which leads to optimal (>1016 cm−3) carrier concentration without a significant impact in other relevant optoelectronic properties. The findings presented in this work demonstrate that the interplay between Li‐doping and Ag‐alloying enables a reproducible and statistically significant improvement in the device performance leading to efficiencies up to 14.1%.

Elemental de-mixing-induced epitaxial kesterite/CdS interface enabling 13%-efficiency kesterite solar cells

A Facile Interface Engineering Method to Improve the Performance of FTO/ZnO/CsPbI 3− X Br X ( X < 1)/C Solar Cells

Multinary alloying for facilitated cation exchange and suppressed defect formation in kesterite solar cells with above 14% certified efficiency

Gradient bandgap enables >13% efficiency sulfide Kesterite solar cells with open-circuit voltage over 800 mV

Multi-interface engineering to realize all-solution processed highly efficient Kesterite solar cells

Over 10% Efficiency Pure Sulfide Kesterite Solar Cells on Transparent Electrode with Cd-Ag Co-Alloying

Highly efficient, ultrathin, Cd-free kesterite solar cells in superstrate configuration enabled by band level tuning via Ag incorporation

A Strategy to Stabilize Kesterite Czts for High-Performance Solar Cells

Kesterite Solar Cells: Insights into Current Strategies and Challenges

A Critical Review on the Progress of Kesterite Solar Cells: Current Strategies and Insights

Defect Control for 12.5% Efficiency Cu2 ZnSnSe4 Kesterite Thin-Film Solar Cells by Engineering of Local Chemical Environment

Cu2ZnSnS4 solar cells with over 10% power conversion efficiency enabled by heterojunction heat treatment

Defect Control for 12.5% Efficiency Cu2ZnSnSe4 Kesterite Thin-Film Solar Cells by Engineering of Local Chemical Environment

Heterojunction interface regulation to realize high-performance flexible Kesterite solar cells

Li‐Doping and Ag‐Alloying Interplay Shows the Pathway for Kesterite Solar Cells with Efficiency Over 14%

Ag Incorporation with Controlled Grain Growth Enables 12.5% Efficient Kesterite Solar Cell with Open Circuit Voltage Reached 64.2% Shockley–Queisser Limit

Regulating Hetero‐Nucleation Enabling Over 14% Efficient Kesterite Solar Cells

Towards a high efficient Cd-free double CZTS layers kesterite solar cell using an optimized interface band alignment

Abundance Of Cu-Zn + Sn-Zn And 2cu(Zn) + Sn-Zn Defect Clusters In Kesterite Solar Cells

An ITO‐Free Kesterite Solar Cell

Passivating Grain Boundaries via Graphene Additive for Efficient Kesterite Solar Cells