Abstract:Molten chloride salts (including MgCl 2 , KCl, NaCl, and ZnCl 2 ) are being considered for heat transfer media for renewable (solar) and nuclear power generators, as fuel carrier for nuclear reactors, and as thermal energy storage media. Impurities such as oxygen, hydroxides, moisture, and sulfur are known to negatively influence the corrosion of materials in contact with the salt (e.g., structural metals). Commercially available chloride salts come with a range of impurities. Before using the chloride salts at high temperature, it is desirable to remove the impurities to increase the performance of the salt and reduce corrosion. In this study, we tested the use of thionyl chloride vaporized into a stream of argon to react with oxygenated impurities in a mixture of MgCl 2 -KCl-NaCl, removing them as HCl and SO 2 . The reagent was bubbled through the salt when both above and below the melting point. The reaction was followed using thermocouple data from the salt and by Fourier transform infrared (FTIR) spectroscopy on the exhaust of the reactor. The reaction kinetics were followed by comparing the peaks from SO 2 product to SOCl 2 reagent in the FTIR spectra. The purity of the salt was assessed at the end of the purification process by x-ray diffraction and inductively coupled plasma analysis. Although the process was effective in removing the oxygen content of the mixture, ternary compounds were formed in the process, including KNiCl 3 and KMgCl 3 . The nickel in KNiCl 3 came from the reaction between the salt and the nickel vessel. Thus, these experiments suggest that improvements to the process must be made before using SOCl 2 vapors for the purification of chloride salts.

Purification of Alkali-Metal Chlorides by Zone Recrystallization for Use in Pyrochemical Processing of Spent Nuclear Fuel

Reactive-crystallization method for purification of LiCl salt waste

Hybrid Nanofiltration–membrane Crystallization System for the Treatment of Sulfate Wastes

Benchtop Zone Refinement of Simulated Future Spent Nuclear Fuel Pyroprocessing Waste

Electrochemical purification of waste salt from pyro-processing of spent nuclear fuels

The chlorination and separation of aluminum using low-temperature sulfur chloride reagents

Pyrochemical reprocessing of molten salt fast reactor fuel: focus on the reductive extraction step

Reactive-crystallization method for purification of LiCl–KCl eutectic salt waste

Different methods to synthesize sodalite, as a matrix for conditioning chloride spent salts from pyroprocesses

Salt clean-up for recycling by electrolysis with a cathode-perforated ceramic container assembly

Dechlorination of molten chloride waste salt from electrorefining via ion-exchange using pelletized ultra-stable H-Y zeolite in a fluidized particle reactor

Lanthanide Silicide Formation on Si Electrode in LiCl–KCl Melt for Immobilization of Chloride Waste in Pyroprocessing of Nuclear Fuels

THE DEVELOPMENT OF THE LIQUID CHROMATOGRAPHY PROCESS FOR THE SPENT NUCLEAR FUEL REPROCESSING TECHNOLOGY

Chlorination of UO2, PuO2 and rare earth oxides using ZrCl4 in LiCl–KCl eutectic melt

Electrochemical de-chlorination/transformation of metal chloride for the preparation of NZP structure product

Technology for Reprocessing Mother–Wash Solution after Crystallization Purification of Spent Nuclear Fuel from High Temperature Gas-Cooled Reactor

Process optimization of a closed-chamber distillation system for the recovery of FLiNaK molten salt

Computational model‐based design of molten salt electrorefining process for high‐purity zirconium metal recovery from spent nuclear fuel

Radiochemical and chemical characterization of fuel, salt, and deposit from the electrorefining of irradiated U-6 wt% Zr in hot cells

Recovery of actinides and fission products from spent nuclear fuel via electrolytic reduction: Thematic overview

Chloride Salt Purification by Reaction With Thionyl Chloride Vapors to Remove Oxygen, Oxygenated Compounds, and Hydroxides