Abstract:Molten chloride salts (including MgCl 2 , KCl, NaCl, and ZnCl 2 ) are being considered for heat transfer media for renewable (solar) and nuclear power generators, as fuel carrier for nuclear reactors, and as thermal energy storage media. Impurities such as oxygen, hydroxides, moisture, and sulfur are known to negatively influence the corrosion of materials in contact with the salt (e.g., structural metals). Commercially available chloride salts come with a range of impurities. Before using the chloride salts at high temperature, it is desirable to remove the impurities to increase the performance of the salt and reduce corrosion. In this study, we tested the use of thionyl chloride vaporized into a stream of argon to react with oxygenated impurities in a mixture of MgCl 2 -KCl-NaCl, removing them as HCl and SO 2 . The reagent was bubbled through the salt when both above and below the melting point. The reaction was followed using thermocouple data from the salt and by Fourier transform infrared (FTIR) spectroscopy on the exhaust of the reactor. The reaction kinetics were followed by comparing the peaks from SO 2 product to SOCl 2 reagent in the FTIR spectra. The purity of the salt was assessed at the end of the purification process by x-ray diffraction and inductively coupled plasma analysis. Although the process was effective in removing the oxygen content of the mixture, ternary compounds were formed in the process, including KNiCl 3 and KMgCl 3 . The nickel in KNiCl 3 came from the reaction between the salt and the nickel vessel. Thus, these experiments suggest that improvements to the process must be made before using SOCl 2 vapors for the purification of chloride salts.

Chloride Salt Purification by Reaction With Thionyl Chloride Vapors to Remove Oxygen, Oxygenated Compounds, and Hydroxides

High-temperature corrosion of a nickel-based alloy in a molten chloride environment – The effect of thermal and chemical purifications

Enabling chloride salts for thermal energy storage: implications of salt purity

In Situ Chlorine Generation and Rare Earth Chlorination by Molten Salt Electrolysis

The Transition of Mg-Containing Phases and Recovery of NaCl in Molten Salt Chloride Slags at High Temperature

Thermal properties of binary chlorides relevant to molten salt chemistry

Method To Determine MgO and MgOHCl in Chloride Molten Salts

Electrochemical Study on the Impact of Nacl Impurity on Corrosion of Stainless Steel 316l in Molten Nitrate Salts for Thermal Energy Storage

Chlorination of UO2, PuO2 and rare earth oxides using ZrCl4 in LiCl–KCl eutectic melt

Physico-Chemical Properties of Molten NaCl–KCl–Na2S System for Sulfide Electrolytic Desulfurization

Reactive-crystallization method for purification of LiCl salt waste

Impact of NaCl impurity on corrosion of 316 L steel in molten nitrate salts for thermal energy storage: An electrochemical study

Destruction of chlorobenzene and carbon tetrachloride in a two-stage molten salt oxidation reactor system

Identification and time evolution of thionyl chloride (SOCl 2 ) radiolysis products

Destruction of chlorinated organic solvents in a two-stage molten salt oxidation reactor system

The Conversion of Calcium-Containing Phases and Their Separation with NaCl in Molten Salt Chlorinated Slags at High Temperature

Chlorination Behavior of Low-Grade Titanium Slag in AlCl3-NaCl Molten Salt

Separation of strontium from simulated oxide fuel using molten chloride salts

Process optimization to enhance utilization efficiency of precipitants for chloride removal from flue gas desulfurization wastewater via Friedel's salt precipitation

Influences of impurity Cl− on the thermal performance of solar salt for thermal energy storage

Purification of Alkali-Metal Chlorides by Zone Recrystallization for Use in Pyrochemical Processing of Spent Nuclear Fuel