Abstract:Solar Salt, a molten nitrate salt, plays a crucial role in heat transfer and storage within solar thermal power plants. It helps to mitigate power output fluctuations resulting from changes in sunlight. Additionally, it allows nuclear power plants with thermal energy storage adjusting power output to better meet grid demand, all without altering reactor power. Maintaining the stability of Solar Salt is vital for ensuring the efficiency and cost-effectiveness of these operations. A study was conducted by subjecting fresh Solar Salt to pre-heating at temperatures surpassing the typical operational limits, referred to as the precondition phase, of the Natrium™ Demonstration nuclear plant being built with TerraPower, LLC and GE-Hitachi technology. Subsequently, the focus centered on examining the thermal stability of the preconditioned molten salt under the maximum operating conditions within the ambient atmospheric environment. The preconditioned molten salt, kept at 540 °C for 10 days, consistently exhibited minimal daily mass loss rates at its maximum operating temperatures of 480 and 510 °C, in contrast to the unpreconditioned salt, where initial daily rates were higher and then gradually decreased over time. Furthermore, the molar ratios of nitrite to nitrate ions in the preconditioned salt melts decreased and eventually stabilized at equilibrium states under these maximum operating temperatures. The equilibrium concentrations in the preconditioned melts approached those of the unpreconditioned melts, where nitrite/nitrate ratios increased and eventually stabilized. During the decomposition of both preconditioned and unpreconditioned melts, oxide formation gradually increased but did not reach an equilibrium state. However, the preconditioned melts exhibited lower rate constants at temperatures of 480 °C and 510 °C over time. The onset of melting temperature, initially recorded at 211 °C for the preconditioned 480 and 510 °C melts, gradually increased as the nitrite/nitrate ratios decreased over time, ultimately achieving stability. In contrast, the unpreconditioned 480 and 510 °C melts experienced a gradual decline from 221 °C in their melting points until they reached equilibrium. In , the preliminary treatment of Solar Salt at temperatures exceeding the maximum operation temperatures serves to eliminate impurities and enhance the stability of the molten salt. This preparatory step is essential when using molten nitrate salt as a medium for transferring thermal energy from the sodium cooling loops to the steam generation process in nuclear power plants with thermal energy storage.

Influences of impurity Cl− on the thermal performance of solar salt for thermal energy storage

Electrochemical Study on the Impact of Nacl Impurity on Corrosion of Stainless Steel 316l in Molten Nitrate Salts for Thermal Energy Storage

Impact of NaCl impurity on corrosion of 316 L steel in molten nitrate salts for thermal energy storage: An electrochemical study

Effect of pre-heating on thermal stability of molten nitrate salt

Stabilization of molten salt materials using metal chlorides for solar thermal storage

Thermal performance and economic evaluation of NaCl–CaCl2 eutectic salt for high-temperature thermal energy storage

Improving the Thermal Properties of NaNO3-KNO3 for Concentrating Solar Power by Adding Additives

Effect of metallic magnesium on enhanced specific heat capacity of chloride molten salts for solar thermal storage applications

Enhancements in thermal properties of binary alkali chloride salt by Al 2 O 3 nanoparticles for thermal energy storage

Thermal Stability Calculation and Experimental Investigation of Common Binary Chloride Molten Salts Applied in Concentrating Solar Power Plants

Molecular dynamics simulation of thermophysical properties of NaCl-KCl phase change materials applied to concentrating solar power

Thermal properties of KCl–MgCl2 eutectic salt for high-temperature heat transfer and thermal storage system

High-temperature corrosion of a nickel-based alloy in a molten chloride environment – The effect of thermal and chemical purifications

Design of new molten salt thermal energy storage material for solar thermal power plant

New Insights into the Heat Capacity Enhancement of Nano-Sio2 Doped Alkali Metal Chloride Molten Salt for Thermal Energy Storage: A Molecular Dynamics Study

Thermal transport and storage performances of NaCl–KCl–NaF eutectic salt for high temperatures latent heat

New insights into the heat capacity enhancement of nano-SiO 2 doped alkali metal chloride molten salt for thermal energy storage: A molecular dynamics study

Experimental Study on the Thermal Stability of a New Molten Salt with Low Melting Point for Thermal Energy Storage Applications

A deep potential molecular dynamics study on the ionic structure and transport properties of NaCl-CaCl2 molten salt

Performance Design of High-Temperature Chloride Salts as Thermal Energy Storage Material

Nitrate based nanocomposite thermal storage materials: Understanding the enhancement of thermophysical properties in thermal energy storage