Abstract:Molten salts and their based nanofluids are important media for heat transfer and thermal energy storage in concentrated solar power (CSP) system. To improve the overall efficiency of the CSP plants, it is important to increase the specific heat capacity of molten salt to the extent possible. Nanomaterials have been doped in molten salt to enhance the specific heat capacity of molten salt; however, the mechanism of enhancement in specific heat capacity caused by doping of nanoparticles in molten salt is still unclear. In this work, the Buckingham force field parameters for alkali metal chloride molten salts (KCl, NaCl, LiCl) were first derived and carefully validated. The specific heat capacities, viscosities, and self-diffusion coefficients of pure molten salts and the specific heat capacities of molten-salt-based nanofluids with SiO 2 nanoparticles were investigated by molecular dynamics (MD) simulations. The calculated thermophysical properties of the chloride molten salts using the derived Buckingham potential parameters are in good agreement with the experimental data, and the overall prediction performance is better than that of the BMH potential. Results show that the specific heat capacity of molten salt first increases and then decreases with increasing SiO 2 doping ratio, reaching a maximum value at 1 wt%. The specific heat capacities of KCl, NaCl and LiCl nanofluids with 1 wt% SiO 2 nanoparticle are increased by 6.2 %, 8.6 % and 19.8 % compared to the base salts, respectively. Number density, radial distribution function, coordination number curves, and energy of the nanofluid system were systematically analyzed. It is found that the increase of the specific heat capacities of the molten salt-based nanofluids can be explained by the energy and coordination number change caused by the number density mismatch of cations and anions. Interestingly, the local delamination of cations around SiO 2 nanoparticle surfaces in LiCl-SiO 2 nanofluids is clearly observed and visualized for the first time; it is a phenomenon well explained by the analysis of number density and contributes to the further enhancement of the heat capacity. The findings of this work could provide important fundamentals in understanding and designing more efficient molten salt nanocomposites for thermal energy storage in future studies.

Stabilization of molten salt materials using metal chlorides for solar thermal storage

Thermal insulation for a high temperature molten salt storage tank in a CSP plant

Performance Design of High-Temperature Chloride Salts as Thermal Energy Storage Material

Thermodynamic calculations and experimental studies of ternary molten salts for high-temperature thermal energy storage

Long-Term Evaluation of a Ternary Mixture of Molten Salts in Solar Thermal Storage Systems: Impact on Thermophysical Properties and Corrosion

Effect of metallic magnesium on enhanced specific heat capacity of chloride molten salts for solar thermal storage applications

Thermal Stability Calculation and Experimental Investigation of Common Binary Chloride Molten Salts Applied in Concentrating Solar Power Plants

Design of new molten salt thermal energy storage material for solar thermal power plant

Enhancements in thermal properties of binary alkali chloride salt by Al 2 O 3 nanoparticles for thermal energy storage

Experimental Study on the Thermal Stability of a New Molten Salt with Low Melting Point for Thermal Energy Storage Applications

Influences of impurity Cl− on the thermal performance of solar salt for thermal energy storage

In situ generation of carbon-doped modified KCl-LiCl high-efficiency thermal storage materials with 3D network structure

Improving the Thermal Properties of NaNO3-KNO3 for Concentrating Solar Power by Adding Additives

Experimental and Simulation Study on Enhancing Thermal Energy Storage and Heat Transfer Performance of Ternary Chloride Eutectic Salt by Doping MgO Nanoparticles

Novel Wide-Working-Temperature NaNO3-KNO3-Na2SO4 Molten Salt for Solar Thermal Energy Storage

An effective thermal conductivity correlation for three high-temperature chloride salts melting in a spherical thermal storage capsule

Thermal performance and economic evaluation of NaCl–CaCl2 eutectic salt for high-temperature thermal energy storage

Experimental Test of Properties of KCl–MgCl2 Eutectic Molten Salt for Heat Transfer and Thermal Storage Fluid in Concentrated Solar Power Systems

New insights into the heat capacity enhancement of nano-SiO 2 doped alkali metal chloride molten salt for thermal energy storage: A molecular dynamics study

Optimum design and key thermal property of NaCl–KCl–CaCl2 eutectic salt for ultra-high-temperature thermal energy storage

New Insights into the Heat Capacity Enhancement of Nano-Sio2 Doped Alkali Metal Chloride Molten Salt for Thermal Energy Storage: A Molecular Dynamics Study