Abstract:Molten salts and their based nanofluids are important media for heat transfer and thermal energy storage in concentrated solar power (CSP) system. To improve the overall efficiency of the CSP plants, it is important to increase the specific heat capacity of molten salt to the extent possible. Nanomaterials have been doped in molten salt to enhance the specific heat capacity of molten salt; however, the mechanism of enhancement in specific heat capacity caused by doping of nanoparticles in molten salt is still unclear. In this work, the Buckingham force field parameters for alkali metal chloride molten salts (KCl, NaCl, LiCl) were first derived and carefully validated. The specific heat capacities, viscosities, and self-diffusion coefficients of pure molten salts and the specific heat capacities of molten-salt-based nanofluids with SiO 2 nanoparticles were investigated by molecular dynamics (MD) simulations. The calculated thermophysical properties of the chloride molten salts using the derived Buckingham potential parameters are in good agreement with the experimental data, and the overall prediction performance is better than that of the BMH potential. Results show that the specific heat capacity of molten salt first increases and then decreases with increasing SiO 2 doping ratio, reaching a maximum value at 1 wt%. The specific heat capacities of KCl, NaCl and LiCl nanofluids with 1 wt% SiO 2 nanoparticle are increased by 6.2 %, 8.6 % and 19.8 % compared to the base salts, respectively. Number density, radial distribution function, coordination number curves, and energy of the nanofluid system were systematically analyzed. It is found that the increase of the specific heat capacities of the molten salt-based nanofluids can be explained by the energy and coordination number change caused by the number density mismatch of cations and anions. Interestingly, the local delamination of cations around SiO 2 nanoparticle surfaces in LiCl-SiO 2 nanofluids is clearly observed and visualized for the first time; it is a phenomenon well explained by the analysis of number density and contributes to the further enhancement of the heat capacity. The findings of this work could provide important fundamentals in understanding and designing more efficient molten salt nanocomposites for thermal energy storage in future studies.

In situ generation of carbon-doped modified KCl-LiCl high-efficiency thermal storage materials with 3D network structure

Thermal insulation for a high temperature molten salt storage tank in a CSP plant

Performance Design of High-Temperature Chloride Salts as Thermal Energy Storage Material

Thermodynamic calculations and experimental studies of ternary molten salts for high-temperature thermal energy storage

Thermal properties of KCl–MgCl2 eutectic salt for high-temperature heat transfer and thermal storage system

Effect of metallic magnesium on enhanced specific heat capacity of chloride molten salts for solar thermal storage applications

CO 2 -derived carbon for improving thermal energy storage of molten carbonate

New insights into the heat capacity enhancement of nano-SiO 2 doped alkali metal chloride molten salt for thermal energy storage: A molecular dynamics study

Thermal performance and economic evaluation of NaCl–CaCl2 eutectic salt for high-temperature thermal energy storage

New Insights into the Heat Capacity Enhancement of Nano-Sio2 Doped Alkali Metal Chloride Molten Salt for Thermal Energy Storage: A Molecular Dynamics Study

Influence characteristic and improvement mechanism of thermal storage performance of Packed-bed thermocline tank based on high-temperature molten salt

Molecular dynamics simulation of thermophysical properties of NaCl-KCl phase change materials applied to concentrating solar power

Development of Macro-Encapsulated Phase-Change Material Using Composite of NaCl-Al2O3 with Characteristics of Self-Standing

Optimum design and key thermal property of NaCl–KCl–CaCl2 eutectic salt for ultra-high-temperature thermal energy storage

Experimental study on optimized composition of mixed carbonate for phase change thermal storage in solar thermal power plant

Enhancements in thermal properties of binary alkali chloride salt by Al 2 O 3 nanoparticles for thermal energy storage

Multi-form heat storage performance of expanded graphite based CaCl2 composites for low-grade heat source

Thermal transport and storage performances of NaCl–KCl–NaF eutectic salt for high temperatures latent heat

Experimental Test of Properties of KCl–MgCl2 Eutectic Molten Salt for Heat Transfer and Thermal Storage Fluid in Concentrated Solar Power Systems

Experimental investigation and phase separation elimination of Na2SO4·10H2O and KAl(SO4)2·12H2O mixtures for thermal energy storage

Thermal energy storage properties of carbon nanotubes/sodium acetate trihydrate/sodium monohydrogen phosphate dodecahydrate composite phase-change materials as promising heat storage materials