Corrosion Behaviors of Austenitic Stainless Steel in NaCl-CaCl2-MgCl2 Molten Salt
Xiao-lan WEI,Bo LIU,Ming SONG,Wei-long WANG,Jing DING
DOI: https://doi.org/10.3969/j.issn.1000-565X.2017.10.001
2017-01-01
Abstract:In order to understand the corrosion of the austenitic stainless steel in the molten salt of the ternary magnesium-based chloride NaCl-CaCl2-MgCl2 during a thermal storage,the corrosion behaviors of five kinds of stainless steels (201,304,310S,316L and 321) after being corroded in the molten salt in a short term were investigated by means of the mass loss measurement.Then,a long-term corrosion test on 316L stainless steel which had shown a better corrosion resistance in the short-term corrosion test was conducted.Finally,the changes of the corrosion phase and morphology with the corrosion time were analyzed by means of XRD and SEM.The results show that (1)when the five kinds of stainless steels are immersed in an open crucible full of the molten salt,they suffer more obvious corrosion mass loss than those with a capped crucible do;(2) 316L stainless steel which contains Mo shows a better corrosion resistance at any one of 500,600 and 700 C,furthermore,the annual corrosion rate of 316L stainless steel at 600 C is 0.347 mm per year;(3) the diffraction peak of 316L stainless steel substrate still appears in the pattern after a five-day corrosion,but after a ten-day immersion,the diffraction peak of MgO appears;and (4) the surface of 316L stainless steel is porous after a five-day corrosion,and then,after a ten-day immersion,the corrosion pores are gradually filled by MgO,which is formed by means of the hydrolysis of MgCl2 at high temperatures.