Abstract:Molten salt is considered as a promising heat storage and heat transfer medium due to its efficient thermophysical properties. In order to study the compatibility of five new mixed molten salts obtained with KNO 3 , NaNO 3 , K 2 CO 3 , Ca(NO 3 ) 2 ·4H 2 O, ZnCl 2 , NaF, Na 2 CO 3 , NaCl and MgO as materials and 316L stainless steel, corrosion weight loss, scanning electron microscopy, elemental analysis and XRD were used to analyze the compatibility of 316L stainless steel in the new mixed molten salt at different time and temperatures. The corrosion behavior under the conditions was studied and characterized. Their compatibility data was obtained, and the corrosion mechanism of 316L stainless steel in mixed molten salts was explored. The results show that the corrosion weight of 316L stainless steel increases, and the corrosion degree of grain, crystal crack depth and oxidation degree increase gradually with the increase of temperature and time. The corrosion of molten salt on alloy is mainly caused by the selective diffusion loss and corrosion of Cr, Fe and other elements, and is accompanied by the formation of different metal oxides. The formation of metal oxides can slow down metal corrosion and loss to a certain extent. The corrosion results under different working conditions show that 316L stainless steel has good compatibility with the new mixed molten salt, and has certain application value in the field of heat transfer and energy storage.

Corrosion behaviour of 316 stainless steel in NaCl-KCl-MgCl2 salt vapour at 700°C

Corrosion behavior and mechanism of 316 stainless steel in NaCl–KCl–FeCl3 molten salt and vapor at 300°C

High temperature corrosion behaviour of the 316 stainless steel in NaCl-KCl-AlCl 3 molten salt and its vapour

Corrosion behavior and mechanism of 316 stainless steel in NaCl-KCl-ZnCl2 molten salts at high temperature

Corrosion behaviors and protective layer stabilization mechanism of 316 stainless steel in NaCl–KCl–NaF reciprocal salts at high temperatures

Effect of Temperature and Impurity Content to Control Corrosion of 316 Stainless Steel in Molten KCl-MgCl2 Salt

Impact of NaCl impurity on corrosion of 316 L steel in molten nitrate salts for thermal energy storage: An electrochemical study

Electrochemical Study on the Impact of Nacl Impurity on Corrosion of Stainless Steel 316l in Molten Nitrate Salts for Thermal Energy Storage

Corrosion behavior of carburized 316 stainless steel in molten chloride salts

Revealing the Effect of O2, SO2 and H2O in Supercritical CO2 on the Corrosion Behavior of 316L Steel at Elevated Temperature

Corrosion behavior of iron-based and Ni-based alloys melted in NaCl–MgCl 2 –KCl mixed molten salt under vacuum atmosphere

Corrosion performance of 316 stainless steel and nodular cast iron 600-3 in molten Ca(NO3)2-NaNO3-KNO3 salt

Corrosion and electrochemical investigations for stainless steels in molten Solar Salt: The influence of chloride impurity

High temperature corrosion of 321 stainless steel in purified NaCl-MgCl2 eutectic salt

On the corrosion cracking of austenitic stainless steel in molten solar salt: Experiments and modeling

Elevated temperature molten salt corrosion study of SS304L austenitic boiler steel

Experiment and Analysis of Compatibility between New Phase Change Mixed Molten Salt and 316L Stainless Steel

Corrosion Behavior of 20G and TP347H in Molten LiCl-NaCl-KCl Salt

A Method for Inhibiting Corrosion of Type 316L Stainless Steel in High-Temperature Molten Chloride Salt

Corrosion of Two Iron-Based Aluminaforming Alloys in NaCl-MgCl2 Molten Salts at 600 °C

CORROSION BEHAVIOR OF SUPER-AUSTENITIC STAINLESS STEEL AL-6XN IN SUPERCRITICAL WATER