Abstract:Molten salt has been increasingly acknowledged to be useful in the destruction of chlorine-containing organic wastes (COWs), e.g., organochlorine. However, the operational temperatures are usually high, and local structure and thermodynamic property of the molten salt remain largely unclear. In this study, novel molten NaOH-KOH is developed for organochlorine destruction, and its eutectic point can be lowered to 453 K with 1:1 mol ratio of NaOH to KOH. Further experiment shows that this molten NaOH-KOH is highly-efficient towards the destructions of both trichlorobenzene and dichlorophenol, acquiring the final dechlorination efficiencies as 88.2% and 94.1%, respectively. The organochlorine destruction and chloride salt enrichment are verified by fourier-transform infrared spectrometer. Molten NaOH-KOH not only eliminates the C-Cl and CC bonds, but also traps generated CO<sub>2</sub>, other acidic gases, and possibly particulate matters as a result of the high surface area and high viscosity. This makes it possibly advantageous over incineration for organic waste destruction for carbon neutrality. To sufficiently reveal the inherent mechanism for the temperature dependent performance, molecular dynamics simulation is further adopted. Results show that the radial distance between ions increases with temperature, causing larger molar volume and lower resistance to shear deformation. Moreover, thermal expansion coefficient, specific heat capacity, and ion self-diffusion coefficient of the molten NaOH-KOH are found to increase linearly with temperature. All these microscopic alterations contribute to the organochlorine destruction. This study benefits to develop highly-efficient molten system for COWs treatment via a low-carbon approach.

Destruction of chlorinated organic solvents in a two-stage molten salt oxidation reactor system

Destruction of chlorobenzene and carbon tetrachloride in a two-stage molten salt oxidation reactor system

Study on 1,2,3-trichlorobenzene destruction in a binary (Na,K) 2CO3 molten salt oxidation system

The Co-Activation of Persulfate with Tannic Acid and Sodium Hydroxide for the Degradation of p-Chlorophenol

MOLTEN SALT OXIDATION OF CHLOROBENZENE

Behavior of Toxic Metals and Radionuclides During Molten Salt Oxidation of Chlorinated Plastics

Remediation of 1,2,3-trichlorobenzene contaminated soil using a combined thermal desorption-molten salt oxidation reactor system

Highly-efficient molten NaOH-KOH for organochlorine destruction: Performance and mechanism

Effects of oxygen content on gaseous and solid products during molten salt oxidation of cation exchange resins

Molten salt oxidation of organic hazardous waste with high salt content

Molten salt oxidation: A versatile and promising technology for the destruction of organic-containing wastes

Molten hydroxide for detoxification of chlorine-containing waste: Unraveling chlorine retention efficiency and chlorine salt enrichment

Study on the destruction process of cationic exchange resins treated by Li2CO3-Na2CO3-K2CO3 molten salt

Direct VUV photolysis of chlorinated methanes and their mixtures in an oxygen stream using an ozone producing low-pressure mercury vapour lamp

A novel co-catalyzed system between persulfate and chlorite by sonolysis for removing triphenylmethane derivative

Degradation of Trichloromethane by the Combination of UV Irradiation and Peroxymonosulfate

Destruction of Decabromodiphenyl Ether (Bde-209) in A Ternary Carbonate Molten Salt Reactor

Probing the radical chemistry in UV/persulfate-based saline wastewater treatment: kinetics modeling and byproducts identification

Oxidative degradation of pentachlorophenol by permanganate for ISCO application

Chloride Salt Purification by Reaction With Thionyl Chloride Vapors to Remove Oxygen, Oxygenated Compounds, and Hydroxides

The conversion of organic sulfur and strontium into inorganic compounds during the molten salt oxidation of mixed resin