Abstract:The recent exponential growth in the Li ion batteries (LIB) market, is largely driven by the demand for electric vehicles and the general transition to a green and digital economy. It is therefore imperative to develop more effective and economic processes for recovering battery raw materials such as Li, Co, Cu and Ni. Moreover, these materials are all classified as critical or strategic (Cu, Ni) raw materials by the European Commission, and for Europe, it is of great importance to build a sustainable European supply chain for Li and other battery raw materials to decrease its dependency on import. In this work, we have studied the possibility to recover Li, Ni, Cu and Co from secondary raw materials like black mass (cathode and anode fraction from shredded end- of-life Li ion batteries), as well as Li from spodumene concentrate, spodumene being an important and available Li mineral. The approach has been to convert the metals in the raw materials to metal chlorides, by chlorination in LiCl-KCl (58 : 42) melts at 470 °C and CaCl2-NaCl-KCl (35 : 30 : 30) at 727 °C. With this method, the metals could potentially be reduced from the chloride matrix by subsequent sequential electrodeposition, utilizing their difference in nobility. Regarding black mass, the highest chlorination yields were obtained from uncalcined material (Li 64 %, Co and Ni 22–24 %, Cu 83 %, and Mn 49 %) in LiCl-KCl at 470 °C, the carbon in the black mass probably enhancing the chlorination rate. For spodumene concentrate, a high yield for Li (100 %) was obtained with Cl2 in CaCl2-NaCl-KCl at 727 °C, this melt composition being more oxoacidic and the higher temperature helping the chlorination kinetics.

Recovery of actinides and fission products from spent nuclear fuel via electrolytic reduction: Thematic overview

Removal of impurity metals as phosphates from Lithium-ion battery leachates

Pyrochemical reprocessing of molten salt fast reactor fuel: focus on the reductive extraction step

Reduction of U(VI) and some fission products in HNO3 media by galvanostatic electrolysis

Multiphysics Simulation Study of the Electrorefining Process of Spent Nuclear Fuel from LiCl-KCl Eutectic Molten Salt

Hydrophilic Chelators for Aqueous Reprocessing of Spent Nuclear Fuel

Salt clean-up for recycling by electrolysis with a cathode-perforated ceramic container assembly

Development of an Advanced Ion Exchange Process for Reprocessing Spent Nuclear Fuels

Radiochemical and chemical characterization of fuel, salt, and deposit from the electrorefining of irradiated U-6 wt% Zr in hot cells

Recovery of Li, Co, Cu and Ni by Molten Salt Chlorination

Reduction-ammoniacal leaching to recycle lithium, cobalt, and nickel from spent lithium-ion batteries with a hydrothermal method: Effect of reductants and ammonium salts

Selective Extraction of Sm from LiCl-KCl Molten Salt into Wasteforms Via Liquid Bismuth

Efficient Recovery of the Fission Element Neodymium by Electrodeposition from Molten LiCl–KCl and Research on the Thermodynamics and Dynamics of Processes

Computational model‐based design of molten salt electrorefining process for high‐purity zirconium metal recovery from spent nuclear fuel

The Electrolytic Reduction of Gd 2 O 3 in LiCl-KCl-Li 2 O Molten Salt

Development of a New Aqueous Process for Nuclear Fuel Reprocessing: Hot Tests on the Recovery of U and Pu from a Nitric Acid Solution of Spent LWR Fuel

Optimization of a Pyrometallurgical Process to Efficiently Recover Valuable Metals from Commercially Used Lithium-Ion Battery Cathode Materials LCO, NCA, NMC622, and LFP

Preparation of Γ-Uranium-molybdenum Alloys by Electrochemical Reduction of Solid Oxides in LiCl Molten Salt

Innovative Approach for Efficient Extraction of Nd from Electrorefining Waste Salt into Nuclear Waste Forms

Lanthanide Silicide Formation on Si Electrode in LiCl–KCl Melt for Immobilization of Chloride Waste in Pyroprocessing of Nuclear Fuels