Abstract:Americium and curium, present in spent nuclear fuel, are carried forward to the high-level wastes (HLW) upon its reprocessing within the closed nuclear fuel cycle strategy. These minor actinides are required to be extracted efficiently to mitigate the long-term radiotoxicity of the HLW, which in some countries is the proposed strategy for the safe management of radioactive wastes emanating from the reprocessing of spent nuclear fuel. While both Am and Cm are co-extracted by most of extractants used for actinide partitioning and lanthanide-actinide separations, their mutual separation makes Am transmutation less complicated. In their most stable (trivalent) oxidation state, these elements are very difficult to separate. In this review, solvent extraction systems for the mutual separation of Am(III) and Cm(III) from nitric acid solutions are discussed. The extraction systems for the separation of americium directly from high-level liquid waste and from isolated mixtures of americium and curium are considered. Abbreviations: D:distribution ratio, <math> D = C o r g C a q </math>, where Corg – total concentration of a metal in the organic phase, Caq – total concentration of a metal in the aqueous phase; DF: decontamination factor, <math> D F = C x , f e e d ⋅ Q f e e d C x , p r o d u c t ⋅ Q p r o d u c t </math>, where Cx,feed, Cx,product – concentrations of an impurity in the initial feed solution and the product solution (raffinate or back-extract), Qfeed, Qproduct – flow rates of the initial feed solution and the product solution; GW×day/tHM: burn-up of nuclear fuel, where tHM – tons of heavy metal; HAC: high active concentrate; HLW: high level waste; HSAB: Hard and Soft Lewis Acids and Bases; Kex: constant of extraction, for the reaction M3+ (aq) + 3NO3 − (aq) +nL(org) = M(NO3)3Ln (org), Kex: [M3+][NO3 −]3[L]n/[M(NO3)3Ln]; PUREX: Plutonium Uranium Reduction EXtraction; GANEX: Grouped ActiNide EXtraction; REE: rare earth element; SF: separation factor, SF = D1/D2, D1>D2; SNF: spent nuclear fuel; TRLIFS: time-resolved laser induced fluorescence spectrometry; β: constant of complex formation; List of ligands: ADAAM(EH): tetra-(2-ethylhexyldiamide-(2-ethylhexyl)-amine; BTPhen: bis-triazinylphenanthroline; (Cl-Ph)2PS2H: bis-(chlorophenyl)-dithiophosphinic acid; CMPO: Carbamoylmethylphosphine oxide DMDOHEMA: N,N'-dimethyl-N,N'-dioctyl-2-(hexyloxy)ethylmalonamide; DOODa: N,N,N',N'-tetraalkyl-3,6-dioxaoctanediamide; H2BP18C6: N,N'-bis[(6-carboxy-2-pyridyl)methyl]-1,10-diaza-18-crown-6; H4TPAEN: N,N,N',N'-tetrakis-[(6-carboxypyridin-2-yl)-ethylenediamine; HDEHP: di-(2-ethylhexyl)phosphoric acid; HEDTA: hydroxyethylethylenediaminetriacetic acid; HEH[EHP]: 2-ethylhexylphosphonic acid; NTAamide: N,N,N,N',N',N'-hexaalkylnitrilotriacetamide; PhPyPO: phenyl-pyridine phosphine oxide; TBP: tri-(n-butyl)phosphate; TEDGA: tetraethyldiglycolamide; TEHP: tri-(2-ethylhexyl) phosphate; TODGA: tetraoctyldiglicolamide; TPH: hydrogenated tetrapropylene List of terms: CHON-principle: An idea that the extractant molecule should consist only of carbon, hydrogen, oxygen and nitrogen atoms, so that the spent ligand can be easily incinerated without the formation of any solid waste. Salting out-agent: An inorganic salt with the same counter-ion as an extracted complex has.Counter-current process: A process in which the solvent and the aqueous feed streams, in contact with each other, flow in opposite directions.

An overview of solvent extraction processes developed in Europe for advanced nuclear fuel recycling, part 1 — heterogeneous recycling

Advances in partitioning of minor actinides and rare earths from high level liquid waster

Organophosphorus Extractants: A Critical Choice for Actinides/Lanthanides Separation in Nuclear Fuel Cycle

Americium Recovery from Highly Active PUREX Raffinate by Solvent Extraction: The EXAm Process. A Review of 10 Years of R&D

A New Partitioning Process for High-Level Liquid Waste by Extraction Chromatography Using Silica-Substrate Chelating Agent Impregnated Adsorbents

Group Partitioning of Minor Actinides and Rare Earths from Highly Active Liquid Waste by Extraction Chromatography Utilizing Two Macroporous Silica-Based Impregnated Polymeric Composites

HYDROXYLAMINE DERIVATIVE IN PUREX PROCESS. VI. STUDY ON THE PARTITION OF URANIUM/NEPTUNIUM AND URANIUM/PLUTONIUM WITH N,N-DIETHYLHYDROXYLAMINE IN THE PURIFICATION CYCLE OF URANIUM CONTACTOR

Progress of extractant studies in the partitioning of minor actinides

Solvent extraction systems for mutual separation of Am(III) and Cm(III) from nitric acid solutions. A review of recent state-of-the-art

A review of separation processes proposed for advanced fuel cycles based on technology readiness level assessments

Purification of U from U-10Mo scrap generated during the fabrication of high performance research reactor fuel

New approaches to the separation and concentration of americium in high oxidation forms for the fractionation of high-level waste

Selective separation of rare earth, Sr, Mo, and Zr from simulated raffinate of uranium/plutonium co-purification process

Head-End Dissolution for UC Processes and UC-PuC Reactor Fuels

Experimental testing and process simulation of flowsheets for the co-separation of uranium and plutonium using acetohydroxamic acid as a complexing agent

Extraction of Palladium from Spent Nuclear Fuel Reprocessing Solutions

Group Hexavalent Actinide Separation from Lanthanides Using Sodium Bismuthate Chromatography

N,N-Dialkyl amides as extractants for spent fuel reprocessing: an overview

Nuclear Fuel Cycle-Oriented Actinides Separation in China

Efficient separation of americium by a mixed solvent of two extractants, a diamideamine and a nitrilotriacetamide

Pyrochemical reprocessing of molten salt fast reactor fuel: focus on the reductive extraction step