Abstract:Establishing a capability for generating consistent, small-scale, and high-purity metals ( i.e. , transition metals, lanthanides and actinides) would have significant impact in many levels from fundamental science to national security related applications. Among the many procedures to purify transition and f-block metals (direct oxide reduction, electrolysis in molten salts, etc), there does not exist a U.S. process that can respond to the diverse needs of small- and large-scale science campaigns. Hence, there is widespread need to develop a capability that can supply a broad range of customers with “craft” metals of interest. The main goal is to consistently convert metal oxides to chemically pure metals in near quantitative yield. Traditional separation methods of actinides and lanthanides from aqueous media has been based on structure and bonding differences between these metals with various ligands. Although liquid-liquid extractions have proven to be quite efficient, they are expensive and require complex engineering. On the other hand, separation by pyro-chemistry based on the difference of their reductive extraction to metallic phase provides a good separation performance but requires the use of high temperatures, which adds technological difficulties to the process. An alternative method that has grown interest in the last few years is the utilization of the difference in the reduction potentials from ionic state to metallic state. However, this electrochemical approach has been believed difficult because of the highly negative reduction potentials of these metals (more negative than hydrogen evolution) and the challenging control of their electrolytic deposition onto solid cathodes. In this work we present a process comprising the oxide reduction by electrochemical amalgamation and thermal extraction (OREATE) that intends to be an optimized version of the traditional electrochemical amalgamation process in aqueous medium for trivalent f-elements. A mercury pool is used as cathode material to overcome most of the difficulties related to the use of solid cathodes: (i) Once reduced to the metallic state, the metal quickly dissolves into the liquid mercury to form amalgam, which ensures more stable surface condition of the cathode. (ii) Higher hydrogen over-voltage on mercury enables more effective reduction of the metals in a slightly acidic solution. (iii) Mercury's high vapor pressure allows an easy thermal extraction process to obtain a highly pure metal. As part of our study, we have maximized the yield of the Ce electrochemical amalgamation (yield > 99%) by monitoring dissolved Ce 3+ concentration in solution by UV-vis, optimized the mercury recycling process during the thermal extraction (Hg recycling > 99%), as well as improved the purity of the Ce content in the product (Ce purity > 99%). The proposed OREATE method appears easier and simpler than traditional separation and purification methods and is suitable for laboratory scale preparation of high purity metals.

Purification of U from U-10Mo scrap generated during the fabrication of high performance research reactor fuel

HYDROXYLAMINE DERIVATIVE IN PUREX PROCESS. VI. STUDY ON THE PARTITION OF URANIUM/NEPTUNIUM AND URANIUM/PLUTONIUM WITH N,N-DIETHYLHYDROXYLAMINE IN THE PURIFICATION CYCLE OF URANIUM CONTACTOR

Synthesis and Application of A Macroporous Silica-Based Polymeric Octyl(Phenyl)-N,N-Diisobutylcarbamoylmethylphoshine Oxide Composite for the Chromatographic Separation of High Level Liquid Waste

Selective separation of rare earth, Sr, Mo, and Zr from simulated raffinate of uranium/plutonium co-purification process

An overview of solvent extraction processes developed in Europe for advanced nuclear fuel recycling, part 1 — heterogeneous recycling

U-Si and U-Si-Ai Dispersion Fuel Alloy Development for Research and Test Reactors

Head-End Dissolution for UC Processes and UC-PuC Reactor Fuels

Separation of U4+/UO22+ from the Chloride Molten Salts with Microplasma Gaseous Anodes

Technology for Reprocessing Mother–Wash Solution after Crystallization Purification of Spent Nuclear Fuel from High Temperature Gas-Cooled Reactor

Radiochemical and chemical characterization of fuel, salt, and deposit from the electrorefining of irradiated U-6 wt% Zr in hot cells

Computational model‐based design of molten salt electrorefining process for high‐purity zirconium metal recovery from spent nuclear fuel

Assay of Zirconium and Americium in the Irradiated U-Zr Metal Alloy Fuel Slug

Co-processing of uranium and plutonium for sodium-cooled fast reactor fuel reprocessing by acid split method for plutonium partitioning without reductant

Oreate - Oxide Reduction by Electrochemical Amalgamation and Thermal Extraction

Nitrate Conversion and Supercritical Fluid Extraction of Uo2-Ceo2 Solid Solution Prepared by an Electrolytic Reduction-Coprecipitation Method

A European manufacturing line for monolithic U–Mo bare foil production

Initial development of an alkaline process for recovery of uranium from 99Mo production process waste residue

Americium Recovery from Highly Active PUREX Raffinate by Solvent Extraction: The EXAm Process. A Review of 10 Years of R&D

Synthesis, Characterization and Dissolution behavior of Nitrides of U-Zr and U-Pu-Zr Metallic Alloy fuels for Aqueous Reprocessing

Separation of uranium from lanthanides (La, Sm) with sacrificial Li anode in LiCl-KCl eutectic salt

Preparation of Γ-Uranium-molybdenum Alloys by Electrochemical Reduction of Solid Oxides in LiCl Molten Salt