Abstract:To eliminate a few specific elements from highly active liquid waste (HLW), two macroporous silica-based N,N,N′,N′-tetraoctyl-3-oxapentane-1,5-diamide (TODGA) and octyl(phenyl)-N,N-diisobutylcarbamoylmethylphosphine oxide (CMPO) impregnated polymeric composites, TODGA/SiO2-P and CMPO/SiO2-P, were synthesized. It was done by an advanced vacuum sucking technique through impregnation of the chelating agents into the pores of SiO2-P particles support. The partitioning of Sr(II), Pd(II), Zr(IV), Mo(VI), and Cs(I) from a 3.0M HNO3 solution containing some typically simulated fission and non-fission products Ru(III), Rb(I), Fe(III), Na(I), K(I), and Ba(II) was performed at 298 and 323K, respectively. In the first column packed with TODGA/SiO2-P, Sr(II), Pd(II), and Zr(IV) were adsorbed and eluted effectively by 0.01M HNO3, 0.05M DTPA-pH 2.5, and 0.5M oxalic acid, respectively, while others showed very weak or almost no adsorption and flowed into effluent along with 3.0M HNO3. Cs(I), Fe(III), and Mo(VI) containing effluent was then applied to the second column packed with CMPO/SiO2-P. Fe(III) and Mo(VI) were found to be adsorbed together and eluted utilizing 0.05M DTPA-pH 2 at 323K. The effective partitioning of Fe(III) was of great benefit to the evaporation, concentration, and finally geological disposal of HLW. The separation of Sr(II) and Mo(VI) was useful for the vitrification of HLW due to the Sr heat generator property and low solubility of Mo oxides in molten glass materials. Cs(I) can be separated by a novel silica-based 1,3-[(2,4-diethyl-heptylethoxy)oxy]-2,4-crown-6-calix[4]arene (Calix[4]arene-R14) impregnated polymeric composite (Calix[4]arene-R14/SiO2-P). In terms of the results obtained, a highly specific partitioning process of Fe(III) and some specific fission products Sr(II), Pd(II), Zr(IV), Cs(I), and Mo(VI) from a simulated HLW by extraction chromatography was proposed.

Extraction of Palladium from Spent Nuclear Fuel Reprocessing Solutions

Palladium Removal from the Simulated Nuclear Spent Fuel Solution Using a Silica‐Based SiPyR‐N3 Anion Exchanger

Development of Palladium Separation Process from Nitric Acid Medium Utilizing a New Hybrid Multi-Nitrogen Adsorbent

Association Behavior of 4-Acylpyrazolone Derivative and Tertiary Amine of High Molecular Weight in Antagonistic Synergistic Extraction of Palladium

Advances in partitioning of minor actinides and rare earths from high level liquid waster

Extraction Chemistry of Palladium(II). Mechanism of Antagonistic Synergistic Extraction of Palladium By A 4-Aroyl Derivative of 1-phenyl-3-Methyl-Pyrazolone-5- one and Trialkylamine of High Molecular Weight

Removal of Pd(II), Zr(IV), Sr(II), Fe(III), and Mo(VI) from simulated high level liquid waste by extraction chromatography utilizing the macroporous silica-based polymeric materials

Minor Actinides Partitioning: Uptake of Palladium with Triazine-Containing Adsorbent under the Framework of Spmp Process

New Insight into the Partitioning of Minor Actinides I: Extraction of Palladium and Some Typical Metals with A Multidentate Soft-Ligand 2,6-Bis(5,6-dinonyl-1,2,4-triazine-3-yl)pyridine

A New Partitioning Process for High-Level Liquid Waste by Extraction Chromatography Using Silica-Substrate Chelating Agent Impregnated Adsorbents

Recovery of Palladium(II) and Platinum(IV) in Novel Extraction Systems

Extraction Chromatography–electrodeposition(ec–ed) Process to Recover Palladium from High-Level Liquid Waste

Recovery of Palladium from Nitric Acid Solutions of Spent Nuclear Fuel Reprocessing

Highly efficient and selective adsorption of palladium(II) from simulated nuclear waste solution using Amberlite XAD-7 resin impregnated with a phenanthroline-derived diamide

Separation of Pd from Pt and Rh by solvent extraction method from waste solution

Closed-loop process for selective leaching and recovery of palladium from spent auto-exhaust catalysts using iodotrihalide ionic liquids

Toward the Recovery of Platinum Group Metals from a Spent Automotive Catalyst with Supported Ionic Liquid Phases

Efficient Chloride Salt Extraction of Platinum Group Metals from Spent Catalysts

Efficient separation of palladium from nitric acid solution by a novel silica-based ion exchanger with ultrahigh adsorption selectivity

Preparation of a Novel Silica-Based N-donor Ligand Functional Adsorbent for Efficient Separation of Palladium from High Level Liquid Waste

Efficient separation of palladium from high-level liquid waste with novel adsorbents prepared by sulfhydryl organic ligands containing imidazole, thiazole and oxazole composited with XAD7HP