Abstract:Efficient and sustainable recovery of precious metals from the acidic leaching solution of solid waste is considered to be the main solution to the scarcity of precious metal resources. In this study, a hydrophobic deep eutectic solvent (HDES) was synthesized using trioctylmethylammonium chloride (N263) and oleic acid (OA). HDES was then used for the efficient recovery of Ir, Pt, Ru, and Rh from leaching solution containing precious metals. The effects of different molar ratios between N263 and OA, the initial pH of the aqueous phase, the oscillation time, and the phase ratio O/A of the extraction process were investigated. The organic phases were characterized analytically using ultraviolet-visible spectroscopy, Fourier-transform infrared spectroscopy, and electrospray ionization–mass spectrometry to further investigate the reaction mechanisms of the extraction process. The single-stage extraction percentages of Ir(IV), Ru(III), Pt(IV), and Rh(III) ions were 97.57%, 94.26%, 99.55%, and 15.1%, respectively. The high saturation extraction capacity of HDES enabled a high precious metal load, reaching 18.44 g L −1 . Hydrogen bonds were formed between Cl - , which was bound by electrostatic force in the N263 structure, and H in the -COOH group in the OA molecule. During the extraction process, metal chloride complex ions replaced Cl - and entered the organic phase as 2[C 17 H 33 -COOH···N263 + ]IrCl 6 2- , 3[C 17 H 33 -COOH···N263 + ]RuCl 6 3- , 2[C 17 H 33 -COOH···N263 + ]PtCl 6 2- , and 3[C 17 H 33 -COOH···N263 + ]RhCl 6 3- . After scrubbing for effective removal of Cu and Fe in the loaded organic phase, different systems were used for stripping. The stripping percentage of precious metal ions reached more than 96.3%, providing efficient separation of the four precious metals from wastewater.

Separation of Pd from Pt and Rh by solvent extraction method from waste solution

Separation of Pd and Pt from highly acidic leach liquor of spent automobile catalysts with monothio-Cyanex 272 and trioctylamine

Palladium Removal from the Simulated Nuclear Spent Fuel Solution Using a Silica‐Based SiPyR‐N3 Anion Exchanger

Separation of Pt(IV), Pd(II), Ru(III), and Rh(III) from chloride medium using liquid–liquid extraction with mixed imidazolium-based ionic liquids

Selective separation of phosphatidylserine and phosphatidylcholine with ionic liquids as extractants

Selective Recovery of Platinum Group Metals from Spent Automotive Catalysts by Leaching and Solvent Extraction

Separation of Palladium from Alkaline Cyanide Solutions through Microemulsion Extraction Using Imidazolium Ionic Liquids

Separation of Palladium, Platinum and Rhodium from Metallic Mixture by Selective Dissolution with Hydrochloric Acid Solutions Containing Oxidizing Agents

Extraction of Palladium from Spent Nuclear Fuel Reprocessing Solutions

Recovery of Palladium(II) and Platinum(IV) in Novel Extraction Systems

Continuous extractive separation of palladium ( II ) ,platinum ( IV ) and rhodium ( III ) with phenylthiourea -tributylphosphate system

Toward the Recovery of Platinum Group Metals from a Spent Automotive Catalyst with Supported Ionic Liquid Phases

Separation and recovery of iridium(IV) from simulated secondary resource leachate by extraction - electrodeposition

Extraction of Palladium(II) and Platinum(IV) from Hydrochloric Acid Solutions with Trioctylammonium Nitrate Ionic Liquid without Dilution

Study on the extraction and separation of precious metals from wastewater using a hydrophobic deep eutectic solvent

Palladium(II) extraction from acidic chloride media using an ionic liquid-based aqueous two-phase system (IL-ATPS) in the presence of dipotassium hydrogen phosphate salting-out agent and reductive stripping with hydrazine hydrate to recover palladium metal

Solid Phase Extraction of Palladium Uusing Microspheres Containing Hexyl Benzimidazolyl Sulphide As Sorbent

Study on extraction of Rh(III) by DABCO-based ionic liquid from hydrochloric acid medium

Closed-loop process for selective leaching and recovery of palladium from spent auto-exhaust catalysts using iodotrihalide ionic liquids

A Short Review of the Separation of Iridium and Rhodium from Hydrochloric Acid Solutions by Solvent Extraction

Recovery of Platinum-Group Metals from an Unconventional Source of Catalytic Converter Using Pressure Cyanide Leaching and Ionic Liquid Extraction