Abstract:The increasing demand and limited natural resources for rare precious metal palladium render its separation and recovery from secondary sources such as acidic nuclear liquid waste greatly interesting. Herein, a novel Et-Tol-DAPhen extraction resin was prepared by impregnating Amberlite XAD-7 resin with a phenanthroline-derived diamide extractant N , N ′-diethyl- N , N ′-ditolyl-2,9-diamide-1,10-phenanthroline (Et-Tol-DAPhen), and the adsorption behavior of this new extraction resin towards Pd 2+ in HNO 3 solution was investigated through the batch and column experiments. The Et-Tol-DAPhen extraction resin exhibited strong adsorbability, high adsorption capacity, excellent selectivity and good reusability for Pd 2+ in highly acidic HNO 3 solution. In addition, the pseudo-second-order and Langmuir models were applied to understand the adsorption process of Pd 2+ on Et-Tol-DAPhen extraction resin, respectively. It demonstrated the characteristics of a uniform single-layer chemisorption. The maximum uptake capacity could reach as high as 74.6 mg g −1 for Pd 2+ in 3.0 mol/L HNO 3 solution which is much higher than most adsorbent materials of palladium reported before. Furthermore, Et-Tol-DAPhen extraction resin could selectively uptake Pd 2+ from a simulated acidic nuclear waste solution containing 20 different kinds of ions with the separation factor SF Pd/M values as high as 100 to 10,000. Moreover, although the adsorption efficiency had a slight decrease after 5 times of adsorption-desorption process, it still remained at a high level. This new extraction resin displayed a potential application prospect in the field of separation and recovery of Pd 2+ from acidic nuclear liquid waste.

Highly efficient and selective adsorption of palladium(II) from simulated nuclear waste solution using Amberlite XAD-7 resin impregnated with a phenanthroline-derived diamide