Abstract:The molten salt waste from the pyroprocess is one of the problematic wastes to directly apply a conventional process such as vitrification or ceramization. This study suggested a novel method using a reactive material for metal chlorides at a molten temperature of salt waste, and then converting them into manageable product at a high temperature. The inorganic composite, SAP (SiO2-Al2O3-P2O5), synthesized by a conventional sol-gel process has three or four distinctive domains that are bonded sequentially, Si-O-Si-O-A-O-P-O-P. The P-rich phase in the SAP composite is unstable for producing a series of reactive sites when in contact with a molten LiCl salt. After the reaction, metal aluminosilicate, metal aluminophosphate, metal phosphates and gaseous chlorines are generated. From this process, the volatile salt waste is stabilized and it is possible to apply a high temperature process. The reaction products were fabricated successfully by using a borosilicate glass with an arbitrary composition as a chemical binder. There was a low possibility for the valorization of radionuclides up to 1200 degrees C, based on the result of the thermo gravimetric analysis. The Cs and Sr leach rates by the PCT-A method were about 1 x 10(-3) g/(m2 day). For the final disposal of the problematic salt waste, this approach suggested the design concept of an effective stabilizer for metal chlorides and revealed the chemical route to the fabrication of monolithic wasteform by using a composite as an example. Using this method, we could obtain a higher disposal efficiency and lower waste volume, compared with the present immobilization methods.

Reactive-crystallization method for purification of LiCl–KCl eutectic salt waste

Reactive-crystallization method for purification of LiCl salt waste

Salt clean-up for recycling by electrolysis with a cathode-perforated ceramic container assembly

Vacuum distillation of a mixture of LiCl-KCl eutectic salts and RE oxidative precipitates and a dechlorination and oxidation of RE oxychlorides

Removal of rare earth elements and thorium from LiCl–KCl molten salt by phosphate precipitation method

Dechlorination of molten chloride waste salt from electrorefining via ion-exchange using pelletized ultra-stable H-Y zeolite in a fluidized particle reactor

Electrochemical purification of waste salt from pyro-processing of spent nuclear fuels

Lanthanide Silicide Formation on Si Electrode in LiCl–KCl Melt for Immobilization of Chloride Waste in Pyroprocessing of Nuclear Fuels

Purification and recovery of NaCl from epoxy resin waste salt through an integrated process based on aqueous two-phase systems (ATPS)

Electrochemical de-chlorination/transformation of metal chloride for the preparation of NZP structure product

Synergistic promotion of low-temperature pyrolysis and chloride complexation in waste salt purification process

Selective Extraction of Sm from LiCl-KCl Molten Salt into Wasteforms Via Liquid Bismuth

Understanding and controlling the key crystal phase transformation for recovery of sodium chloride from organic waste salt

Separation of uranium from lanthanides (La, Sm) with sacrificial Li anode in LiCl-KCl eutectic salt

Purification of Alkali-Metal Chlorides by Zone Recrystallization for Use in Pyrochemical Processing of Spent Nuclear Fuel

Electrochemical Behavior and Separation of Ce(III) in LiCl-KCl Molten Salt

Dissolution Behavior of Simulated Spent Nuclear Fuel in LiCl-KCl-UCl3 Molten Salt

Chloride recovery and simultaneous CO2 mineralization from rare earths high salinity wastewater by the Reaction-extraction-crystallization process

Stabilization/solidification of radioactive salt waste by using xSiO2-yAl2O3-zP2O5 (SAP) material at molten salt state

Separation and recycling of chloride salts from electrolytic titanium powders by vacuum distillation

Investigation of electrochemical behavior of cerium in LiCl-KCl eutectic molten salt by modeling