Abstract:This work aims to study a possible modification in the electronic structure of scandia-ceria-stabilized zirconia (10Sc1CeSZ) ceramics sintered at different temperatures. In addition to using X-ray diffraction (XRD), scanning electron microscopy (SEM) and impedance spectroscopy to investigate the structural and electrical properties, we employed X-ray photoelectron spectroscopy (XPS) to determine the chemical state information of the atoms involved, along with compositional analysis. As expected, a significant increase in grain ionic conductivity with the sintering temperature was present. This increase was accompanied by a decrease in the porosity of the samples, an increase in the grain size, and a transformation from the rhombohedral to the cubic phase. The phase transformation was detected not only using XRD, but also using XPS and, for this type of ceramic, XPS detected this transformation for the first time. In addition to the changes in the structural characteristics, the increase in the ionic conductivity was accompanied by a modification in the electronic structure of the ceramic surface. The XPS results showed that the surface of the ceramic sintered at the lower temperature of 1100 °C had a higher amount of Zr-OH bonds than the surface of the ceramic sintered at the higher temperature of 1400 °C. The existence of these Zr-OH bonds was confirmed using Fourier-transform infrared spectroscopy (FTIR). From this result, taken together with the difference between the oxygen/zirconium ratios in these ceramics, also identified using XPS, we conclude that there were fewer oxygen vacancies in the ceramic sintered at the lower temperature. It is argued that these two factors, together with the changes in the structural characteristics, have a direct influence on the conductive properties of the studied ceramics sintered at different temperatures.

Preparation of Cerium Stabilized Zirconia Bulk Ceramics by Spark Plasma Sintering

Preparation of Zirconia Ceramics by Spark Plasma Sintering Technique and Their Mechanical Properties

Effects of Preparation Conditions on the Structural and Optical Properties of Spark Plasma‐Sintered PLZT (8/65/35) Ceramics

Enhanced Dielectric Strength and Energy Storage Density in BaTi 0.7 Zr 0.3 O 3 Ceramics Via Spark Plasma Sintering

Sintering kinetics of cerium-stabilised tetragonal zirconia

Stability properties and microstructure properties of microwave-sintered CeO2 doped zirconia ceramics

X-ray Photoelectron Spectroscopy Analysis of Scandia-Ceria-Stabilized Zirconia Composites with Different Transport Properties

Phase microstructure and morphology evolution of MgO-PSZ ceramics during the microwave sintering process

Improvement of Mechanical Strength of 8 mol % Yttria-Stabilized Zirconia Ceramics by Spark-Plasma Sintering

Morphological and structural evaluation of spark plasma sintered calcium silicate ceramics

Making Nanostructured Ceramics from Micrometer-Sized Powders via Grain Refinement During SPS Sintering

Preparation of Porous Spodumene/zircon Composite Ceramics and Its Thermal and Mechanical Properties

Spark plasma sintering of magnesium titanate ceramics

Fabrication of Pure T′ Phase YSZ Ceramics by Spark Plasma Sintering

Study on Fabrication of Zirconia Nanopowder Plasma-Sprayed Coating

Phase stability and microstructure morphology of microwave-sintered magnesia-partially stabilised zirconia

Preparation of Cepo4 Modified Zro2 Ceramics with Different Particle Sizes and Their Mechanical Behaviors

Zirconia-Mullite Obtained from Co-Precipitated Zirconia-Mullite Composite Powders by Sps

Microstructure and Mechanical Properties of Nano-Size Zirconium Carbide Dispersion Strengthened Tungsten Alloys Fabricated by Spark Plasma Sintering Method

Characteristic Analysis on Electric Smelting Quenching Ca-PSZ

Crystal structure and morphology of CeO2 doped stabilized zirconia ceramics under high-frequency microwave field sintering