Abstract:Free-form grid shell structures are widely used for stadiums, airport terminals, exhibition pavilions, shopping malls and warehouses, however, the shape of the grid surface is usually complex. A flexible joint that can adapt to the curvature variation of the free-form surface is therefore important for assembling such structures. To meet the demand of various curvatures for single-layer free-form grid structures, a new type of prefabricated bolted joint is introduced in this paper. A series of in-plane bending tests were conducted to investigate the initial stiffness and the moment resistance of the joints. Coupon tests were carried out to study the material properties and provide parameters for a numerical study. FE models considering the geometric and material nonlinearity were developed and validated by the tests. Parametric studies were then carried out using the developed FE model to investigate the influencing geometric factors of the in-plane behaviours semi-rigid joints. The results demonstrated that the initial in-plane stiffness of the joints is dominantly controlled by the endplate thickness, the side plate thickness, the bolt diameter and the bolt row distance, while the moment resistance of the joint is governed by the endplate thickness, the side plate thickness, the sleeve cross-sections and the bolt row distance. Subsequently, FE analysis was carried out using the validated FE models to investigate the out-of-plane behaviour of the proposed assembled joint. The experimental and numerical study showed that the proposed joint has good rotational capacity and load-bearing resistance, therefore has the potential to be applied in the design and construction of free-form grid structures.

Research on Comprehensive Technology of Steel Grid Installation and Integral Jacking

Strength Analysis of a Certain 350 ft Jack-up Offshore Platform Jacking System in Emergency Lifting Process under Different Working Conditions

Hydraulic lifting technology of steel grid roof of a hangar

A New Design Conception for Large Span Deployable Flat Grid Structures

Jacking Technology for a Simply Supported Girder Bridge

Single-Side Accumulative Jacking Construction Method for Large-Span Arched Latticed Shells

Environmental Effects Caused by Construction of Rectangular Jacking Pipes with Large Section, Small Space and Shallow Overburden

Field Studies on Effect of Jacked Pile on Adjacent Buildings and Roads in Clay

Analysis and Monitor of Hanger Rod Installation by Jacking Tie Beam on Heterotypical Arch Bridge

Stability analysis of braced structures under jacking construction of large span steel truss bridges

Integral Lifting Construction and Monitoring of Qifeng Bridge in Huzhou City

Site-based Experimental Study on Pipe Behavior During Pipe Jacking

Analysis of the forces in the construction of large-span steel box girder by incremental construction

Construction Simulation and Monitoring of the Jacking Steel Truss and Main Column of a Super High-Rise Building

Monitoring and control of steel truss arch bridge jacking construction

Model Tests on Jacking Installation and Lateral Loading Performance of Jacket Foundation in Sand

Application of Jack Element Model for Numerical Simulation of Removing Temporary Supports of Large-span Steel Roof

Integral Lifting of a Three-Span Continuous Beam Bridge

FINITE ELEMENT SIMULATION ANALYSIS OF STEEL TRUSS ARCH BRIDGE JACKING CONSTRUCTION

Jack-gap element model for numerical simulation of removing temporary supports of large-span steel structural roof

Experimental and Numerical Study on the Performance of New Prefabricated Connections for Free-Form Grid Structures