Abstract:A non-equiatomic high-entropy alloy (HEA) of the Al – Co – Cr – Fe – Ni system was obtained using wire-arc additive manufacturing technology in the atmosphere of pure argon. The initial wire had 3 conductors with different chemical composition: pure aluminum wire (Al ≈ 99.95 %), chromium-nickel wire (Cr ≈ 20 %, Ni ≈ 80 %), and cobalt alloy wire (Co ≈ 17 %, Fe ≈ 54 %, Ni ≈ 29 %). The resulting sample of high-entropy alloy was a parallelepiped consisting of 20 deposited layers in height and 4 layers in thickness. The alloy had the following elemental composition, detected by energy-dispersive X-ray spectroscopy: aluminum (35.67 ± 1.34 at. %), nickel (33.79 ± 0.46 at. %), iron (17.28 ± 1.83 at. %), chromium (8.28 ± 0.15 at. %) and cobalt (4.99 ± 0.09 at. %). Scanning electron microscopy revealed that the source material has a dendritic structure and contains particles of the second phase at grain boundaries. Element distribution maps obtained by mapping methods have shown that grain volumes are enriched in aluminum and nickel, while grain boundaries contain chromium and iron. Cobalt is distributed in the crystal lattice of the resulting HEA quasi-uniformly. It is shown that during tensile tests, the material was destroyed by the mechanism of intra-grain cleavage. The formation of brittle cracks along the boundaries and at the junctions of grain boundaries, i.e., in places containing inclusions of the second phases, is revealed. It was suggested that one of the reasons for the increased fragility of HEA, produced by wire-arc additive manufacturing, is revealed uneven distribution of elements in microstructure of the alloy and also the presence in material volume of discontinuities of various shapes and sizes.

Friction Stir Welding of the Carbon-Doped Dual-Phase High Entropy Alloy

Ultrahigh Cryogenic Strength and Exceptional Ductility in Ultrafine-Grained CoCrFeMnNi High-Entropy Alloy with Fully Recrystallized Structure

Realizing strength-ductility combination of Fe3.5Ni3.5Cr2MnAl0.7 high-entropy alloy via coherent dual-phase structure

Microstructure of and mechanical properties of an as-cast fine-grain dual-phase Fe-based high entropy alloy formed via solid-state phase transformation

Structure and properties of Fe40Mn20Cr20Ti10Al10 high-entropy alloy fabricated by mechanical alloying and spark plasma sintering

Microstructure and mechanical property of gas tungsten arc and friction stir welds of L12 precipitate FCC high-entropy alloy

Microstructure and mechanical properties of Al-Fe-Co-Cr-Ni high entropy alloy fabricated via powder extrusion

Implementing high entropy alloy synthesis via friction stir processing: Simultaneous solid-state alloying and ultra-refinement of copper

Carbon Effect on Tensile and Wear Behaviors for a Dual-Phase Fe61.5 Cr17.5ni13al8 Alloy

Microstructure and Mechanical Behavior Comparison between Cast and Additive Friction Stir-Deposited High-Entropy Alloy Al0.35CoCrFeNi

Fabrication of high-strength dual FCC phase Co-Cr-Fe-Ni-Cu-Mo high entropy alloy by plasma arc additive manufacturing using a combined cable wire

Friction stir welding of AA5010 aluminum alloy to St-12 carbon steel using CoCrCuFeNi high entropy alloy interlayer

Development of a large size FCC high-entropy alloy with excellent mechanical properties

Microstructure and mechanical properties of CoCrFeNiTa high entropy alloy prepared by mechanical alloying and spark plasma sintering

Friction stir processing of high-entropy alloy reinforced aluminum matrix composites for mechanical properties enhancement

Microstructure and Properties of a Co-Free Fe50mn27ni10cr13 High Entropy Alloy

Deformation behavior of high-entropy alloy system Al – Co – Cr – Fe – Ni achieved by wire-arc additive manufacturing

Electron beam melting of (FeCoNi)86Al7Ti7 high-entropy alloy

The Printability, Microstructure, and Mechanical Properties of Fe80−xMnxCo10Cr10 High-Entropy Alloys Fabricated by Laser Powder Bed Fusion Additive Manufacturing

Revealing the Effects of Friction Stir Processing on the Microstructural Evolutions and Mechanical Properties of As‐Cast Interstitial FeMnCoCrN High Entropy Alloy

Heterogeneous Microstructure and Tensile Properties of Fe50Mn30Co10Cr10 Metastable High-Entropy Alloy