Abstract:An alternative design strategy for determining alloying‐element contents based on game theory and operations research theory is proposed to effectively substitute scarce alloying elements with abundant ones. Cu‐1.95Ni‐0.5Co‐0.6Si‐0.2Mg‐0.1Cr, an alloy with an ultra‐low Co content (64% lower than that of the C70350 alloy) is developed and exhibited properties comparable to those of the original alloy. The extensive use of scarce, expensive, and toxic elements in high‐performance metal alloys restricts their sustainable development. Here we propose a novel alternative alloying‐element design strategy that combines physicochemical‐factor screening, a "black‐box" interpretative method based on SHapley Additive exPlanation analysis, and sensitivity analyses of elemental influence. A "white‐box" model of alloy compositions and properties is therefore established that enables the rational selection of abundant elements and the efficient designs of alloys with substitution for scarce alloying elements. The success of this design strategy is demonstrated by reducing the Co content in the C70350 alloy series (e.g., Cu‐1.3Ni‐1.4Co‐0.56Si‐0.03Mg (wt.%)). Indeed, Cu‐1.95Ni‐0.5Co‐0.6Si‐0.2Mg‐0.1Cr (wt.%) is obtained as an ultra‐low‐Co‐containing alloy by substituting only a trace amount of Cr for Co in the Cu‐Ni‐Co‐Si‐Mg system, followed by compositional optimization. Although the Co content is reduced by 64% (i.e., from 1.4 to 0.5 wt.%), the properties of the alloy (ultimate tensile strength and electrical conductivity of 850 MPa and 47.2%IACS, respectively) are comparable to those of the C70350 alloy. This study contributes to the sustainable and green development of metallic materials by providing a new avenue for substituting abundant elements for scarce and undesired elements in metal alloys.

Rapid design of secondary deformation-aging parameters for ultra-low Co content Cu-Ni-Co-Si-X alloy via Bayesian optimization machine learning

Reforming Nanostructured CuAg Alloy to Improve Ductility and Electrical Conductivity

Accelerated discovery of high-performance Cu-Ni-Co-Si alloys through machine learning

Accelerated composition-process-properties design of precipitation-strengthened copper alloys using machine learning based on Bayesian optimization

Enhancing Stress Corrosion Cracking Resistance of Low Cu-Containing Al-Zn-Mg-Cu Alloys by Aging Treatment Control

Ageing Behavior of Cu-15Ni-8Sn Alloy Prepared by Mechanical Alloying

Customized development of promising Cu-Cr-Ni-Co-Si alloys enabled by integrated machine learning and characterization

A property-oriented design strategy for high performance copper alloys via machine learning

Breaking hardness and electrical conductivity trade-off in Cu-Ti alloys through machine learning and Pareto front

Abnormally high work hardening ability and excellent comprehensive properties of copper alloys due to multiple twins and precipitates

Empowering the Sustainable Development of High‐End Alloys via Interpretive Machine Learning

Excellent Mechanical Properties and High Electrical Conductivity of Cu-Co-Si-Ti Alloy Due to Multiple Strengthening

Accelerated design of L12-strengthened Co-base superalloys based on machine learning of experimental data

Simultaneously enhancing the strength and electrical conductivity of Cu-Ni-Sn alloy through plastic deformation of an intermetallic compound

Machine learning assisted design of γ′-strengthened Co-base superalloys with multi-performance optimization

Machine Learning-Assisted Discovery of Strong and Conductive Cu Alloys: Data Mining from Discarded Experiments and Physical Features

Optimizing strength and electrical conductivity of Cu–Fe–Ti alloy by pre-aging treatment

Combined experimental and computational investigation of precipitation behaviour and mechanical properties in a novel Cu–Ni–Si–Co alloy: effect of solution treatment temperature

Machine learning assisted multi-objective optimization for materials processing parameters: A case study in Mg alloy

Dramatically Enhanced Combination of Ultimate Tensile Strength and Electric Conductivity of Alloys via Machine Learning Screening

Machine learning assisted design of high-strength Sn-3.8Ag-0.7Cu alloys with the co-additions of Bi and In