Abstract:The optimization of process is essential for improving the overall properties of high-strength and high- conductivity Cu alloys. This study introduces a high-temperature short-time treatment (HTSTT, 850 degrees C/5 min) into the thermo-mechanical process of a Cu-Cr - Cr alloy. Following the process of "solid solution- cold rolling- HTSTT- cold rolling- aging", the tensile strength of the alloy increases from 450 MPa to 508 MPa, with the electrical conductivity increasing from 82.2 %IACS to 86.4 %IACS when compared to the conventional process of "solid solution- cold rolling- aging" under the same total deformation condition. The reasons for the improvement in the comprehensive properties of the alloy after introducing HTSTT are analyzed through microstructural characterization. The results indicate that the HTSTT promotes the occurrence of recrystallization, leading to grain refinement, which results in smaller grain sizes during subsequent processing. Additionally, the introduction of HTSTT changes the main texture of the alloy from (100)//X to (111)//X during the process, which is beneficial to enhancing the alloy's strength and electrical conductivity. More importantly, the HTSTT facilitates the precipitation of solute Cr atoms, leading to the formation of a significant quantity of nanoscale Cr particles, most of which are spherical with an average size of 27 nm. During the subsequent cold rolling process, these Cr particles effectively pin dislocations and promote their proliferation, leading to the precipitation of a large number of smaller Cr particles during the aging process, with an average size of 4.8 nm. These finer Cr particles are crucial for precipitation strengthening. This paper offers valuable insights into the microstructural optimization and performance enhancement of high-strength and high-conductivity Cu alloys.

Optimizing strength and electrical conductivity of Cu–Fe–Ti alloy by pre-aging treatment

Reforming Nanostructured CuAg Alloy to Improve Ductility and Electrical Conductivity

Managing Mechanical and Electrical Properties of Nanostructured Cu-Fe Composite by Aging Treatment

Microstructure and Property of Cu–2.7Ti–0.15Mg–0.1Ce–0.1Zr Alloy Treated with a Combined Aging Process

Precipitation Behavior and Performance Evolution of Cold-Rolled Cu-Ti-fe Alloy During Heat Treatment

Effect of Cold Rolling and Aging Treatment on the Microstructure and Properties of Cu–3Ti–2Mg Alloy

Effects of Thermomechanical Treatment on Microstructure and Properties of Cu-0.1wt%Fe-0.03wt%P Alloy

Effects of Pre-Aging on Microstructure and Properties of Cu-Ni-Si Alloys

Ultrahigh Strength and Improved Electrical Conductivity in an Aging Strengthened Copper Alloy Processed by Combination of Equal Channel Angular Pressing and Thermomechanical Treatment

Achieving High Strength and High Conductivity of Cu-6 wt%Ag Sheets by Controlling the Aging Cooling Rate

Effect of Pre-Aging on Mechanical Reinforcement of the Cu-Fe-Nb Composites

Effects of aging treatment on mechanical and electrical properties of Cu-Co-(Ti) alloys

Microstructure and Mechanical Properties of a High Strength Cu-Ni-Si Alloy Treated by Combined Aging Processes

Effects of Fe Content on Properties and Microstructure of Cu–Ti Alloys During Aging

Accelerating heterogeneous nucleation to increase hardness and electrical conductivity by deformation prior to ageing for Cu-4 at.% Ti alloy

Influences of Cold Rolling and Aging on Microstructure and Property of CuCrSn Alloy

Effect of deformation and aging treatment on the microstructure and properties of Cu-0.45Cr-0.14Ti (wt.%) alloy

Microstructure Evolution and Mechanical Property of Cu-15Ni-8Sn-0.2Nb Alloy During Aging Treatment

Effect of thermo-mechanical treatment on microstructure and properties of Cu-0.7Fe-0.12P alloy

Achieving Well‐Balanced Strength and Ductility in Warm‐Rolled Fe–30.5Mn–8Al–1.0C Lightweight Austenitic Steels via Aging Treatment

Ameliorating the Microstructure and Properties of a Cu Cr Alloy by Introducing a High-Temperature Short-Time Treatment into the Thermo-Mechanical Process