Abstract:Pipe conveyors provide sustainable solutions for environmentally sensitive or topographically complex powdered and bulk-solid handling processes; however, belt rotation is among the most critical failure modes of these equipment, influencing engineering, operational, and maintenance activities throughout the conveyors' lifecycles. Position changes in the overlap are mechanical responses to uneven contact forces between the vulcanizing rubber belt and the idler rolls, owing to the highly nonlinear process of the belt folding from a trough to a tubular shape, and no method for quantifying the belt's stability is currently available. In this study, we analyzed the failure mode of belt rotation and proposed a linearized model of an overlap stability index to evaluate the resilience of the overlap position through a case study of a short-flight curved pipe conveyor. Our proposal considers an interference model between the simulated torque of a curved flight in a pipe conveyor and the calculated torque of its equivalent straight flight by using kernel-smoothed density functions. It is adapted to incorporate adjustment factors for the filling degree based on simulations, the effect of the overlap in the forming force of the belt, the remaining useful life of the belt, and the coefficients of friction between the belt back cover and the idler rolls due to adhesion and hysteresis. An application was developed to calculate the belt's rotational holding torque and rotary moment by processing real operational data, simulated contact forces, and the relevant equipment parameters. This analysis identified the reduced transverse bending stiffness and increased belt tension forces as the root causes for position changes with a loss of contact in the upper idler rolls of curved flights 10, 13, 15–16, and 17. The contributing factors included spots of augmented contact forces during the initial stages of the belt lifespan in curved flights 15–16, which presented unstable conditions due to increased opening forces, with an OSI of 0.8657. Furthermore, we proposed corrective and preventive action plans, an optimized replacement interval for the belt, and recommendations for design changes according to the relevant standards.

Research on the Extrusion Process of belt with Notch Descrition

Design Research on Roller of New Fiber Carding Machine

A Novel Continuous Roll-Forming Process of Elastomer Molds

Experimental research of the thermoplastic belt plasticizing process in the hot plate welding

Metal flowing of involute spline cold roll-beating forming

Non-Linear Analysis Of Elastic Quality For Belt Drives

Mechanisms of Synchronous Belt Tooth Failure Due to Fatigue Shear Fracture

Quantitative analysis of bond and splice strength of steel cord conveyor belt

Quantitative Analysis on Creeping Deformation of Conveying Belt

Finite element modeling and analysis for the integration–rolling–extrusion process of spline shaft

Mathematical modeling and analysis of the tailor rolled blank manufacturing process

Research on Air Cushion Flow Field and Bearing Characteristics of Single Row Hole Air Cushion Belt Conveyor

Process fundamentals and quality investigation in extrusion 3D printing of shear thinning materials: extrusion process based on Nishihara model

Research on Constant Velocity Extruding Process Control for 36,000-Ton Vertical Extrusion Press

Belt Rotation in Pipe Conveyors: Failure Mode Analysis and Overlap Stability Assessment

Numerical modelling of the viscoelastic polymer melt flow in material extrusion additive manufacturing

Transverse squeeze flow of thermoplastic composite tape during in-situ consolidation via automated fiber placement

Fracture failure analysis and research on super-large-diameter roll

The Research of Roll Forming Process of Cylindrical Part with Stepped Ring-stiffeners

Research on plastic deformation law and forming technology of rotary forging with multi-cone rolls

Deformation Distribution of Multi-Filament Superconducting Tape During Rolling Process