Abstract:Plastic freeforming (PF) is an additive-manufacturing process for producing three-dimensional plastic parts based on 3D CAD data by applying plastic droplets in layers. This process is used to produce customer-specific and complex geometries (prototypes and small series) on organic sheets. A comparable serial process is the injection of a second component onto organic sheets by injection molding. A sufficient bond between the PF structure and the organic sheets is of particular importance for each application. If this is not guaranteed, the composite system cannot withstand the mechanical load and fails. The force exerted on the system can no longer be transmitted between the PF structure and the organic sheet. The organic sheet is made of glass fiber-reinforced polypropylene (PP). The connection between the organic sheet and the PF structure is achieved by welding the molten polymer droplets and the surface of the organic sheet. The PF structures are made of PP to ensure sufficient compatibility with regard to the weldability of the components. The processing of PP in the PF process is a challenge because PP is a semi-crystalline material. The shrinkage of semi-crystalline materials is significantly higher compared to amorphous materials. Due to the layered structure of the components, the shrinkage of the individual layers results in undesired warpage. The adhesive strength between the organic sheet and the PF structure is investigated by determining the bending strength in the 3-point bending test. The investigations include an optimization of the process parameters to maximize the adhesive strength. The experimental investigations show that an increase of the nozzle and build chamber temperature leads to a higher adhesive strength. In further investigations, the temperature of the nozzle shows no significant influence on the surface temperature despite the expected heat radiation. The surface temperature is almost only dependent on the temperature of the build chamber.

Experimental research of the thermoplastic belt plasticizing process in the hot plate welding

Experimental approach to modeling of the plasticizing operation in the hot plate welding process

The temperature distribution during heating in hot plate welding process

Process Analysis of the Hot Plate Welding of Drive Belts

Comparative Analysis of Polyurethane Drive Belts with Different Cross-Section Using Thermomechanical Tests for Modeling the Hot Plate Welding Process

Experimental research of round welded drive belts

Assumptions for Modeling of the Hot Plate Welding Process Considering the Automatic Welding Machine Design

Analysis of the mechanical properties of conveyor belts on the three main stages of production

Research on the Extrusion Process of belt with Notch Descrition

A numerical model for the thermoplastic welding process

Modeling the interrelationship between the parameters for improving weld strength in plastic hot plate welding: A DEMATEL approach

The Toxicological Testing and Thermal Decomposition of Drive and Transport Belts Made of Thermoplastic Multilayer Polymer Materials

Optimization of Hot Gas Welding of Hybrid Thermoplastic-Thermoset Composites Using Taguchi Method

Effect of process parameters and talc ratio on hot plate welding of polypropylene

Hot plate welding of plastics: Factors affecting weld strength

Optimization of welding parameters of hot plate welded PC/ABS blends by using the Taguchi experimental design method

Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites

An experimental‐based thermal prediction model for butt fusion welding of polymer pipes

Thermal expansion of high‐density polyethylene in hot plate welding applications