Abstract:New technologies in polymer synthesis and pipe extrusion equipment have led to the commercialization of high-performance, large-diameter, thick-wall high density polyethylene (HDPE) pipes. They have been used in the field of seawater transport and cooling to replace metal pipes, due to their advantages of high corrosion resistance and extensibility. Connection of HDPE pipe is important as it determines the safety of the entire piping system. Butt fusion welding is commonly used for HDPE pipe connection but may cause the formation of weak points in the welded joints, interfering the reliability of the pipeline system in the application of nuclear power plants. At present, there is a lack of research on evaluating the performance of welded joint for large-diameter thick-wall HDPE pipes made by butt fusion-welding. The purpose of this study is to investigate the influence of three different butt fusion-welding processes, i.e., single low pressure (SLP), single high pressure (SHP) and dual low pressure (DLP), by evaluating the performance of their welded joints, including characterizing tensile strength, extensibility, crystallinity and hardness. In specific, a thick-wall HDPE pipe with OD of 812.8mm and wall thickness of 74mm which is certified for nuclear safety class was used for study. Representative specimen from the outer, middle and inner part across the wall of the main pipe body and welded joints were taken for testing. Different test methods and specimens were designed to assess the feasibility of evaluating the welding performance from different welding process. The results showed that the mechanical properties of different locations of the welded joints were different, and the tensile strength and fracture energy of the middle part of the joint were lower than that of the inner and outer parts, which could be caused by the difference in the crystallinity and thickness of the melting zone influenced by welding processes, as can be seen from the analysis of DSC test and morphology observation. Hardness testing was conducted on the section of the welded joints, and it revealed that the micromechanical properties of the welded joints in the region of the heat-affected zone were enhanced significantly, which may be due to the annealing effect caused by welding process. In summary, The DLP process resulted in the best extensibility of the welded joints among three processes, suggesting that the joining pressure from welding process plays an important role in affecting the extensibility of the welded joints.

An experimental‐based thermal prediction model for butt fusion welding of polymer pipes

Thermal, metallurgical and mechanical analysis of circumferentially multi-pass welded P92 steel pipes

Thermal Management for Thermoset Automated Fiber Placement Based on Infrared Heater Structure Arrangement

Simulation of Temperature Field in HDPE Pipe Thermal Welding

Short-Term Mechanical Analysis of Polyethylene Pipe Reinforced by Winding Steel Wires Using Steel Wire Spiral Structural Finite Element Model

Research on Phased Array Ultrasonic Technique for Testing Butt Fusion Joint in Polyethylene Pipe

A Model for Predicting Temperature of Electrofusion Joints for Polyethylene Pipes

Effect of Butt Fusion Welding Beads on Tensile Properties of Polyethylene Pipes

Thermal modeling of friction stir welding of thick high-density polyethylene plates

A numerical model for the thermoplastic welding process

Effect of Preheating Parameters on Extrusion Welding of High-Density Polyethylene Materials

Prediction of Residual Stress Distributions in Welded Sections of P92 Pipes with Small Diameter and Thick Wall Based on 3D Finite Element Simulation

Modeling the matching stage of HDPE hot plate welding: A study using regression and support vector machine models

Comparative study on the performance of butt fusion-welding processes for nuclear safety class large-diameter thick-walled PE pipes

Finite Element Modeling of the Thermomechanical Behavior of Polyethylene

Thermal expansion of high‐density polyethylene in hot plate welding applications

A parametric study of thermal and residual stress fields in lined pipe welding

Numerical and experimental investigation on laser transmission welding of fiberglass-doped PP and ABS

Modeling and experiments of the thermal degradation behavior of PMMA during laser transmission welding process

Analysis on Temperature Field in Electrofusion Joint for Polyethylene Pipes