Abstract:Publication date: 2 October 2023 Source: Key Engineering Materials Vol. 957 Author(s): Carlos Rodríguez-Mondéjar, Alvaro Rodríguez-Prieto, Ana Maria Camacho The development of composite materials has meant, over the last few decades, a challenge for research in relation to the search for new ways of manufacturing. Currently, a wide variety of materials and processes have a high degree of development and industrial applications, but the potential for improvement in this area promotes the search for new systems that allow obtaining products with better mechanical characteristics and better manufacturability. Within this framework of the development of processes and applications, the following combination of manufacturing technologies is proposed: thermoforming and overmolding of carbon fiber reinforced thermoplastics with continuous and short fibers respectively. The aim of this work is to provide a hybrid technology to manufacture sandwich panels whose stiffening core geometry can be highly optimized based on the load requirements considered in the design of the product of interest. The proposed process consists of the prior shaping by thermoforming process of a continuous fiber-reinforced thermoplastic laminate on one of the surfaces of the manufacturing mold that will later be used for injection of the core structure with a counter-mold adapted for this purpose. The injection of the short fiber reinforced thermoplastic will be carried out in such a way that one of the surfaces of the resulting cavity is directly in contact with the previously formed laminate, giving rise to an overmolding. After this operation, a closing laminate will be formed that will give the panel the desired resistance. A detailed analysis of the different stages of this process is necessary, especially with regard to the processing parameters (e.g. injection temperature, pressure, polymer velocity, and interface temperature), orientation of the fiber resulting from the injection process, the adhesion of the polymer between stages, and the geometric limitations of considered sub-processes. The analysis is performed using a finite element method (FEM) software and analytical approaches.

Hybrid vacuum-robotic forming of reinforced composite laminates

Preparation and Validation of a Longitudinally and Transversely Stiffened Panel Based on Hybrid RTM Composite Materials

A hybrid additive manufacturing process for production of functional fiber-reinforced polymer composite structures

Design and manufacture of mould-free fibre-reinforced laminates with compound curvature

Stamp Thermo-Hydroforming: A New Method for Processing Fiber-Reinforced Thermoplastic Composite Sheets

An approach to couple mold design and on-line control to manufacture complex composite parts by resin transfer molding

Rubber mandrel design suitable for manufacture co-cured hat-stiffened composite panel with large curvature by auto fiber placement technique

Developments and Analyses of Alternative Processes for the Manufacturing of Fiber Metal Laminates

Tooling with reinforced elastomeric materials

Automated Process Based on Functionalized Preform and Net-shape High Performance Resin Transfer Molding for High Volume Structural Applications

CF Reinforced Thermoplastic Hybrid Process Proposal for the Optimization of Sandwich Panels Stiffness and Processability

Robot-assisted laser additive manufacturing for high-strength/low-porosity continuous fiber-reinforced thermoplastic composites

Double diaphragm forming simulation for complex composite structures

The use of discontinuous PEEK/carbon fiber thermoplastic moulding compounds for thick-section componentry

Curing and Consolidation of Advanced Thermoset Composite Laminate Parts by Pressing Between a Heated Mold and Customized Rubber-Faced Mold

Vision-based FDM Printing for Fabricating Airtight Soft Actuators

Fabrication and control architecture of novel hybrid metal additive manufacturing incremental forming technology

Integrated design for the forming process and structural performance of variable-thickness laminates

Elastomeric microfluidic valve for active resin flow control within composite structure

Experimental Method to Determine the Draping Behavior of Auxiliary Materials for the Vacuum Bagging of CFRP Parts on Doubled-Curved Surfaces

Development of robotic automation solutions for limp flexible material handling leveraging a finite element modelling technique