Abstract:Microfluidics, as an emerging technology, is highly dependent on the evolution of device materials and fabrication techniques. While replica molding of polydimethylsiloxane and hot embossing/injection molding of thermoplastics are most popular, they are either hard to scale up or inappropriate for laboratory-scale prototyping. Recently, photocurable resins, as a huge class of materials, have attracted extensive interest. However, very few of them can now be used in device fabrication due to the challenge in machining these materials. In response, we herein propose a novel concept of composite elastomers, which can covalently link with and consequently offer a flexible support to photocured thin films. This effect would allow most photocurable resins to be used in microfluidic device fabrication, greatly enriching the material choices for diverse applications. Moreover, the whole fabrication process becomes very simple and rapid, with an impressive throughput of at least hundreds of replicas per day. With these features, it is reasonably expected that the composite elastomer-enabled rapid photofabrication method will be very competent for laboratory prototyping, providing not only the ease of fabrication but also a possibility to select the materials specifically for ultimate applications and promising potential for volume production without the redevelopment process. These may offer a good opportunity to narrow the current gap between academic research and industrial practice.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c06143.Movies showing the flexibility of the composite elastomer, process of composite elastomer-enabled photofabrication of the microfluidic device, generation of W/O/W double emulsion droplets, and operation of Quake valves (MP4, MP4, MP4, MP4)This article has not yet been cited by other publications.

Elastomeric microfluidic valve for active resin flow control within composite structure

Fabrication of Micro Pneumatic Valves with Double-Layer Elastic Poly(dimethylsiloxane) Membranes in Rigid Poly(methyl Methacrylate) Microfluidic Chips

Reasearch and fabrication of integrated pneumatic microvalves in polymer microfluidic chip

Preparation of Normally Open Microvalves with Fluorinated Ethylene Propylene Membrane and Poly(methyl Methacrylate) Substrates

Composite Elastomer-Enabled Rapid Photofabrication of Microfluidic Devices

Preparation of thermoswitchable micro capillary force valves inside polydimethylsiloxane microfluidic channels

The polymer melt swelling behavior in micro-extrusion process for preparation of continuous carbon fiber reinforced PP prepreg filament

Flexible Microfluidic Fabrication of Anisotropic Polymer Microfibers

Fabrication and characterization of hydrogel-based microvalves

Fabrication of Embedded Microvalve on PMMA Microfluidic Devices through Surface Functionalization

Fabrication and modelling of injection moulded all-polymer capillary microvalves for passive microfluidic control

Self-adaptive flexible valve as passive flow regulator

Electrorheological-fluid-based microvalves

Pressure-actuated monolithic acrylic microfluidic valves and pumps

Elastomeric focusing enables application of hydraulic principles to solid materials in order to create micromechanical actuators with giant displacements

The Performance and Fabrication of 3D Variable Cross-Section Channel for Passive Microfluidic Control

Rapid prototyping for high-pressure microfluidics

An approach to couple mold design and on-line control to manufacture complex composite parts by resin transfer molding

Closable Valves and Channels for Polymeric Microfluidic Devices

Ultrasonic bonding with variable amplitude fuzzy control based on force signals for Polymethyl Methacrylate

Influence of microvascular structured void content on composites subjected to in-plane shear loads