Abstract:A weighting‐factor‐free finite control set predictive torque control (FCS‐PTC) has been developed for induction motor drives by incorporating a hysteresis controller to eliminate stator flux error from the cost function. The tuning of the weighting factor coefficient in FCS‐PTC is critical for improved drive performance. The proposed method regulates the flux by incorporating a separate two level hysteresis controller and torque by the conventional cost function based PTC. The cost function uses torque error only and employs a reduced number of voltage vectors. The reduction of voltage vectors is obtained through the flux hysteresis output and sector determination. The obtained results show comparable dynamic performance of the drive with 43% lower computational burden as compared to conventional PTC. Along with computational benefits, proposed work also demonstrates improved total harmonic distortion (THD) at low speed regions due to the absence of weighting factor in cost function. This work proposes a weighting‐factor‐free finite control set predictive torque control (FCS‐PTC) for induction motor drives by incorporating a hysteresis controller to eliminate stator flux error from the cost function. The tuning of the weighting factor coefficient in FCS‐PTC is critical for improved drive performance. Conventionally, the tuning is based on an intuitive understanding of the dynamical system and empirical methods, which may not yield optimal results. The proposed method regulates the flux by incorporating a separate two‐level hysteresis controller and torque by the conventional cost function‐based PTC. The cost function uses torque error only and employs a reduced number of voltage vectors. The reduction of voltage vectors is obtained through the flux hysteresis output and sector determination. The proposed work is implemented experimentally on the dSpace DS1104 controller board for a two‐level three, three‐phase voltage source inverter‐fed induction motor drive. The experimental results validate the effectiveness of the proposed work under different drive tests compared to conventional PTC and direct torque control (DTC). The obtained results show comparable dynamic performance of the drive with 43% lower computational burden than conventional PTC. Along with computational benefit, the proposed work demonstrates improved total harmonic distortion (THD) at low‐speed regions due to the absence of a weighting factor in the cost function.

Experimental Evaluation of VIKOR-Based Cost Function Optimization of Finite Control Set-Predictive Torque Control for Permanent Magnet Synchronous Motor Drive

Dynamic control set-model predictive control for field-oriented control of VSI-PMSM

A Graphical Performance Tool for Design and Comparative Assessment of Predictive Torque Control Methods in Motor Drive Applications

Experimental analysis of enhanced finite set model predictive control and direct torque control in SRM drives for torque ripple reduction

Simple predictive torque control of an open‐end winding interior permanent magnet synchronous motor drive without weighting factor for electric vehicle applications

A Reduced Voltage Vector Strategy-Based PTC of OEW-PMSM Drives

A Novel Torque Ripple Reduction Strategy for Predictive Direct Torque Controlled Pmsg

Model Predictive Torque Control of Surface Mounted Permanent Magnet Synchronous Motor Drives with Voltage Cost Functions

Model predictive flux control for permanent magnet synchronous motor

Hysteresis based predictive torque control without weighting factors for induction motor drives

A look-up table-based model predictive torque control of IPMSM drives with duty cycle optimization

Predictive Torque Control for PMSM Based on Weighting Factor Elimination and Fast Voltage Vector Selection

Finite Control Set Model Predictive Torque Control With Reduced Computation Burden for PMSM Based on Discrete Space Vector Modulation

Deadbeat Model-Predictive Torque Control With Discrete Space-Vector Modulation for PMSM Drives

Sensorless Predictive Torque Control Strategy of Induction Motor Based on Stratified Optimization Method

Relegated Thrust Ripples for Linear Induction Motors Based-Four Voltage Vectors Finite-Set Predictive Control and Model Reference Adaptive System

Adaptive Sliding-Mode-Based Speed Control in Finite Control Set Model Predictive Torque Control for Induction Motors

An Enhanced Electric Vehicle with modified Predictive Direct Torque Control of Open Winding Permanent Magnet Synchronous Motor Drive

An Improved Model Predictive Torque Control for PMSM Drives Based on Discrete Space Vector Modulation

Sliding Model-Based Predictive Torque Control of Induction Motor for Electric Vehicle

Model Predictive Control with a Novel Cost Function Evaluation Scheme for OW-PMSM Drives