Abstract:A weighting‐factor‐free finite control set predictive torque control (FCS‐PTC) has been developed for induction motor drives by incorporating a hysteresis controller to eliminate stator flux error from the cost function. The tuning of the weighting factor coefficient in FCS‐PTC is critical for improved drive performance. The proposed method regulates the flux by incorporating a separate two level hysteresis controller and torque by the conventional cost function based PTC. The cost function uses torque error only and employs a reduced number of voltage vectors. The reduction of voltage vectors is obtained through the flux hysteresis output and sector determination. The obtained results show comparable dynamic performance of the drive with 43% lower computational burden as compared to conventional PTC. Along with computational benefits, proposed work also demonstrates improved total harmonic distortion (THD) at low speed regions due to the absence of weighting factor in cost function. This work proposes a weighting‐factor‐free finite control set predictive torque control (FCS‐PTC) for induction motor drives by incorporating a hysteresis controller to eliminate stator flux error from the cost function. The tuning of the weighting factor coefficient in FCS‐PTC is critical for improved drive performance. Conventionally, the tuning is based on an intuitive understanding of the dynamical system and empirical methods, which may not yield optimal results. The proposed method regulates the flux by incorporating a separate two‐level hysteresis controller and torque by the conventional cost function‐based PTC. The cost function uses torque error only and employs a reduced number of voltage vectors. The reduction of voltage vectors is obtained through the flux hysteresis output and sector determination. The proposed work is implemented experimentally on the dSpace DS1104 controller board for a two‐level three, three‐phase voltage source inverter‐fed induction motor drive. The experimental results validate the effectiveness of the proposed work under different drive tests compared to conventional PTC and direct torque control (DTC). The obtained results show comparable dynamic performance of the drive with 43% lower computational burden than conventional PTC. Along with computational benefit, the proposed work demonstrates improved total harmonic distortion (THD) at low‐speed regions due to the absence of a weighting factor in the cost function.

A Reduced Voltage Vector Strategy-Based PTC of OEW-PMSM Drives

Simple predictive torque control of an open‐end winding interior permanent magnet synchronous motor drive without weighting factor for electric vehicle applications

Predictive Torque Control for PMSM Based on Weighting Factor Elimination and Fast Voltage Vector Selection

Dynamic control set-model predictive control for field-oriented control of VSI-PMSM

A Novel Torque Ripple Reduction Strategy for Predictive Direct Torque Controlled Pmsg

A Graphical Performance Tool for Design and Comparative Assessment of Predictive Torque Control Methods in Motor Drive Applications

Hysteresis based predictive torque control without weighting factors for induction motor drives

Minimization of Flux and Torque Ripples of FPOEW Induction Motor with FCS-MPTC using Synthetic Voltage Vectors

An enhanced predictive current control technique for interior permanent magnet synchronous motor drives with extended voltage space vectors for electric vehicles

Deadbeat Model-Predictive Torque Control With Discrete Space-Vector Modulation for PMSM Drives

Model predictive flux control for permanent magnet synchronous motor

An Effective Direct Torque Control Based on Space Vector Modulation for DTP-PMSM

An Enhanced Electric Vehicle with modified Predictive Direct Torque Control of Open Winding Permanent Magnet Synchronous Motor Drive

Improved Model Predictive Current Control for PMSM Drives Based on Dynamic Reference Current

Modified predictive torque control for balancing three-level NPC inverter-fed PMSM drives

An Improved Model Predictive Torque Control for PMSM Drives Based on Discrete Space Vector Modulation

Fault-Tolerant Predictive Torque Control Design for Induction Motor Drives Based on Discrete Space Vector Modulation

Finite Control Set Model Predictive Torque Control With Reduced Computation Burden for PMSM Based on Discrete Space Vector Modulation

A Dual Two-Vector-Based Model Predictive Flux Control with Field-Weakening Operation for OW-PMSM Drives

Model Predictive Torque Control for Dual Three-Phase PMSM based on Novel Virtual Voltage Vector

Performance Prediction of Direct Torque-Controlled PMSM Drives Considering Different Pulse Selectors Using FEA-Based Model