Abstract:Torque ripple reduction based on harmonic current injection has been widely applied to surface-mounted permanent-magnet synchronous machine (SPMSM) drive systems. However, additional voltages are typically required for harmonic injection, and the dc-link voltage limit should be considered in practical drive systems. This article proposes a novel harmonic control for SPMSMs in which the torque ripple reduction and high dc-link voltage utilization can be achieved simultaneously. The influence of harmonic injection on voltage utilization is investigated in detail. In addition to injecting the appropriate q -axis harmonic currents to suppress torque ripple, the d -axis harmonics are also optimized and injected. The geometric principle is applied to obtain the analytical expression for the optimal d -axis harmonic voltage, which can minimize the maximum magnitude of the stator voltage vector. Since the reference harmonic voltage is directly calculated in accordance with the analytical solution, the implementation complexity of harmonic voltage regulation is relatively low. Moreover, a virtual dual three-phase system with auxiliary currents is developed to decompose the fundamental and harmonic currents without low-pass filters, thus avoiding additional delay in the control loop. Finally, the experimental results are provided to verify the validity of the proposed method.

A Novel Torque Ripple Reduction Strategy for Predictive Direct Torque Controlled Pmsg

Harmonic Injection-Based Torque Ripple Reduction of PMSM with Improved DC-Link Voltage Utilization

A Novel Harmonic Current Control Method for Torque Ripple Reduction of SPMSM Considering DC-Link Voltage Limit

Torque Ripple Reduction of the Torque Predictive Control Scheme for Permanent-Magnet Synchronous Motors

Research on Predictive Direct Torque Control of PMSG

An Effective Direct Torque Control Based on Space Vector Modulation for DTP-PMSM

Torque ripple analysis and reduction of permanent magnet synchronous motor

Research on Direct Torque Control of Induction Machine Based on Torque Prediction

Deadbeat Model-Predictive Torque Control With Discrete Space-Vector Modulation for PMSM Drives

Analysis of Torque Ripples of Vector-Controlled Permanent Magnet Synchronous Motors

A Modified Deadbeat Predictive Flux Control for Reducing Torque Ripple at Low Modulation Ratio

Model predictive flux control for permanent magnet synchronous motor

An Improved Model Predictive Torque Control for PMSM Drives Based on Discrete Space Vector Modulation

Ripple torque lessening in space vector pulse width modulation based direct torque control of permanent magnet synchronous motor drive

Research on Torque Ripple Minimization Strategy for Direct Torque Control of Induction Motors

Hybrid Svpwm Technique for Reduced Torque Ripple in Permanent Magnet Synchronous Motor

Model Predictive Torque Control for Dual Three-Phase PMSM based on Novel Virtual Voltage Vector

New model based predictive torque control algorithm in combination with duty ratio modulation strategy for flux-switching permanent magnet synchronous machines

Finite Control Set Model Predictive Torque Control With Reduced Computation Burden for PMSM Based on Discrete Space Vector Modulation

Model Predictive Torque Control of Surface Mounted Permanent Magnet Synchronous Motor Drives with Voltage Cost Functions

Torque Ripple Reduction for a Four-switch Inverter Fed PMSM DTC System