Abstract:A simplified predictive torque control (PTC) method is proposed to eliminate the flux weighting factor where torque cost function is evaluated for 19 voltage vectors (VVs), but flux cost function is evaluated for only five VVs with sector identification. This method also reduces computational burden on the processor. Permanent magnet synchronous motor (PMSM) drives are effectively used in the application of electric vehicles (EVs) due to their ease of construction and simpler in operation. Model predictive control (MPC) is an efficient control strategy used in motion control applications. Predictive torque control (PTC) is a type of MPC that selects a suitable voltage vector (VV) from a set of 19 VVs in order to minimize the cost function. However, as the control variables in the cost function in PTC are distinct, a weighting factor is essential. The tuning of the weighting factor is a burdensome control process. To address the limitations, the proposed PTC (P‐PTC) removes the weighting factor by using two cost functions, thus reducing flux ripples and torque ripples. Firstly, the P‐PTC evaluates the torque cost function for 19 VVs, and the VV that gives less value of torque error is used to find the sector number. The sector number is used to choose the five VVs from that sector and evaluate flux cost function to get an optimal VV. Therefore, the P‐PTC give less ripples in torque and flux by enhancing steady‐state response. The effectiveness of the P‐PTC is validated through both simulation and experimentation for a 3.7 kW OEW‐IPMSM drive using d‐SPACE RTI1104 controller. The P‐PTC is also tested with a typical urban dynamometer drive cycle (UDDC) with rapid accelerations and decelerations to ensure its application in EVs using the OPAL RT 1250 controller.

Sliding Model-Based Predictive Torque Control of Induction Motor for Electric Vehicle

Adaptive Sliding-Mode-Based Speed Control in Finite Control Set Model Predictive Torque Control for Induction Motors

Predictive Torque Control of Induction Motor Based on a Robust Integral Sliding Mode Observer

Sliding Mode-Based DTC-SVM Control of Permanent Magnet Synchronous Motors for Plug-in Hybrid Electric Vehicles

Optimizing electric vehicle powertrains peak performance with robust predictive direct torque control of induction motors: a practical approach and experimental validation

Robust SVM-direct torque control of induction motor based on sliding mode controller and sliding mode observer

Simple predictive torque control of an open‐end winding interior permanent magnet synchronous motor drive without weighting factor for electric vehicle applications

Direct Torque Model Predictive Control of a Five-Phase Permanent Magnet Synchronous Motor

Modified Sliding Mode Observer-Based Direct Torque Control of Six-Phase Asymmetric Induction Motor Drive

An Enhanced Electric Vehicle with modified Predictive Direct Torque Control of Open Winding Permanent Magnet Synchronous Motor Drive

An Improved Model Predictive Torque Control for PMSM Drives Based on Discrete Space Vector Modulation

Relegated Thrust Ripples for Linear Induction Motors Based-Four Voltage Vectors Finite-Set Predictive Control and Model Reference Adaptive System

Feedback linearization based sensorless direct torque control using stator flux MRAS-sliding mode observer for induction motor drive

An improved ANFIS model predictive current control approach for minimizing torque and current ripples in PMSM-driven electric vehicle

Real-time model predictive control of connected electric vehicles

Super-Twisting Sliding Mode Control to Improve Performances and Robustness of a Switched Reluctance Machine for an Electric Vehicle Drivetrain Application

Position Control of the Induction Motor Using an Adaptive Sliding-Mode Controller and Observers

Three-Vector-Based Model Predictive Torque Control for a Permanent Magnet Synchronous Motor of EVs

Fault-Tolerant Predictive Torque Control Design for Induction Motor Drives Based on Discrete Space Vector Modulation

A look-up table-based model predictive torque control of IPMSM drives with duty cycle optimization

Speed Tracking of a Linear Induction Motor - Enumerative Nonlinear Model Predictive Control