Abstract:In this paper, a near-ideal subthreshold swing MoS2 back-gate transistor with an optimized ultrathin HfO2 dielectric layer is reported with detailed physical and electrical characteristics analyses. Ultrathin (10 nm) HfO2 films created by atomic-layer deposition (ALD) at a low temperature with rapid-thermal annealing (RTA) at different temperatures from 200 degrees C to 800 degrees C have a great effect on the electrical characteristics, such as the subthreshold swing (SS), on-to-off current (I-ON/I-OFF ) ratio, etc, of the MoS2 devices. Physical examinations are performed, including x-ray diffraction, atomic force microscopy, and electrical experiments of metal-oxidesemiconductor capacitance-voltage. The results demonstrate a strong correlation between the HfO2 dielectric RTA temperature and the film characteristics, such as film density, crystallization degree, grain size and surface states, inducing a variation in the electrical parameters, such as the leakage, D-it, equivalent oxide thickness, SS, and I-ON, as well as I-ON/I-OFF of the MoS2 field effect transistors with the same channel materials and fabrication methods. With a balance between the crystallization degree and the surface state, the ultrathin (10 nm) HfO2 gate dielectric RTA at 500 degrees C is demonstrated to have the best performance with a field effect mobility of 40 cm(2) V-1 s(-1) and the lowest SS of 77.6 mV(-1) decade, which are superior to those of the control samples at other temperatures. The excellent transistor results with an optimized industry-based HfO2 ALD and RTA process provide a promising approach for MoS2 applications into the scaling of the nanoscale CMOS process.

Molybdenum disulfide transistors with enlarged van der Waals gaps at their dielectric interface via oxygen accumulation

Monolayer Molybdenum Disulfide Transistors with Scaling Dielectric Equivalent Oxide Thickness

Large-scale flexible and transparent electronics based on monolayer molybdenum disulfide field-effect transistors

Transferred van der Waals metal electrodes for sub-1-nm MoS2 vertical transistors

Performance and stability improvement of CVD monolayer MoS2 transistors through HfO2 dielectrics engineering

Pushing the Performance Limit of Sub-100 nm Molybdenum Disulfide Transistors.

Monolayer Molybdenum Disulfide Transistors with Single-Atom-Thick Gates.

Near-Ideal Subthreshold Swing Mos2 Back-Gate Transistors With An Optimized Ultrathin Hfo2 Dielectric Layer

Heterogeneous complementary field-effect transistors based on silicon and molybdenum disulfide

Sub-10 Nm Monolayer MoS2 Transistors Using Single-Walled Carbon Nanotubes As an Evaporating Mask

Effect of Dielectric Interface on the Performance of MoS2 Transistors.

Steep-slope hysteresis-free negative capacitance MoS2 transistors

Ultimate dielectric scaling of 2D transistors via van der Waals metal integration

High-Performance Wafer-Scale MoS2 Transistors Toward Practical Application

Healing of donor defect states in monolayer molybdenum disulfide using oxygen-incorporated chemical vapour deposition

Yttrium-doping-induced metallization of molybdenum disulfide for ohmic contacts in two-dimensional transistors

Fabrication of hybrid self-assembled monolayer/hafnium oxide gate dielectric by radical oxidation for molybdenum disulfide field-effect transistors

Hysteresis-free MoS 2 metal semiconductor field-effect transistors with van der Waals Schottky junction

Scaling of MoS 2 Transistors and Inverters to Sub-10 nm Channel Length with High Performance

Hopping Transfer Optimizes Avalanche Multiplication in Molybdenum Disulfide

Effectively Suppressed Short-Channel Effects in Small-Size MoS2 Transistors by Introducing Negative-Capacitance Effect Resulted From Ferroelectric HfZrO2 Film