Abstract:Astronomical observation requires more distant and fainter object with a better resolution, so that the larger primary mirror telescope is needed to ensure the better resolution and light energy collection. However, the diameter of monolithic primary mirror is limited due to the manufacturing and logistics limitations. The segmented primary mirror is taken as an alternative solution to break the limitation. The segmented primary mirror must be co-phased to accomplish a diffraction-limited imaging. In this paper, we put forward a new method to measure the tip/tilt errors between the segments in whole aperture simultaneously based on analyzing the intensity distribution and Fourier optics principle. We set a mask with sparse multi-sub-pupils configuration on the segments' conjugate plane. A point source is taken as the object of the segmented telescope, the pattern focused on the CCD is recorded as the point spread function (PSF). Then, the Fourier transform is performed for the PSF and we can obtain the optical transfer function (OTF) which is composed of the modulation and phase transfer functions (MTF and PTF). Tip/tilt errors can be extracted from the PTF side-lobes. Simulation and preliminary experiments have been done to validate the feasibility of the method. The accuracy of the method is 6.344 x 10(-6) lambda(lambda=632.8nm) RMS when the tip/tilt error is less than 0.4 lambda, and when the tip/tilt error is in the range of [0.4 lambda,2.4 lambda], the accuracy is 8.55x10(-15) lambda RMS. We also analyze the disturbance factor of the method in the simulation, including the piston error, the noise of the signal processing system, the surface shape error of the segments, etc. Furthermore, a preliminary experiment is built up to verify the 3 segmented system. This method has a higher detection efficiency and a lower hardware requirement which only needs a mask with sparse sub-aperture configuration.

On-sky results for the integrated microlens ring tip-tilt sensor

On-sky results for the novel integrated micro-lens ring tip-tilt sensor

Metalens-integrated Compact Imaging Devices for Wide-Field Microscopy

Ultra-sensitive angle sensor based on laser autocollimation for measurement of stage tilt motions

Micro-lens array as tip-tilt sensor for single-mode fiber coupling

Infrared tip-tilt sensing: on-sky experience, lessons learned and unsolved problems

Simulation Of Imaging And Refocusing For Light Field Photography

Mechanics of Tunable Hemispherical Electronic Eye Camera Systems That Combine Rigid Device Elements with Soft Elastomers

Ultracompact wavefront characterization of femtosecond 3D printed microlenses using double-frequency Ronchi interferometry

Demonstration of a photonic lantern low order wavefront sensor using an adaptive optics testbed

The MICADO first light imager for the ELT: off-axis performance of PSF reconstruction

Striving towards robust phase diversity on-sky

An All-Day Attitude Sensor Integrating Stars and Sun Measurement Based on Extended Pixel Response of CMOS APS Imager

Optimizing astrophotonic spatial reformatters using simulated on-sky performance

Real-time experimental demonstrations of a photonic lantern wavefront sensor

A Wide-Field and High-Resolution Lensless Compound Eye Microsystem for Real-Time Target Motion Perception

In-lab and On-sky Closed-loop Results of Adaptive Secondary Mirrors with TNO's Hybrid Variable Reluctance Actuators

Multi-spectral piston sensor for co-phasing giant segmented mirrors and multi-aperture interferometric arrays

Striving towards robust phase diversity on-sky: Implementing LIFT for VLT/MUSE-NFM

Diffraction-limited integral-field spectroscopy for extreme adaptive optics systems with the Multi-Core fiber-fed Integral-Field Unit

Multi-tip/tilt errors simultaneous detection for segmented telescopes based on coherent diffraction