Abstract:Astronomical observation requires more distant and fainter object with a better resolution, so that the larger primary mirror telescope is needed to ensure the better resolution and light energy collection. However, the diameter of monolithic primary mirror is limited due to the manufacturing and logistics limitations. The segmented primary mirror is taken as an alternative solution to break the limitation. The segmented primary mirror must be co-phased to accomplish a diffraction-limited imaging. In this paper, we put forward a new method to measure the tip/tilt errors between the segments in whole aperture simultaneously based on analyzing the intensity distribution and Fourier optics principle. We set a mask with sparse multi-sub-pupils configuration on the segments' conjugate plane. A point source is taken as the object of the segmented telescope, the pattern focused on the CCD is recorded as the point spread function (PSF). Then, the Fourier transform is performed for the PSF and we can obtain the optical transfer function (OTF) which is composed of the modulation and phase transfer functions (MTF and PTF). Tip/tilt errors can be extracted from the PTF side-lobes. Simulation and preliminary experiments have been done to validate the feasibility of the method. The accuracy of the method is 6.344 x 10(-6) lambda(lambda=632.8nm) RMS when the tip/tilt error is less than 0.4 lambda, and when the tip/tilt error is in the range of [0.4 lambda,2.4 lambda], the accuracy is 8.55x10(-15) lambda RMS. We also analyze the disturbance factor of the method in the simulation, including the piston error, the noise of the signal processing system, the surface shape error of the segments, etc. Furthermore, a preliminary experiment is built up to verify the 3 segmented system. This method has a higher detection efficiency and a lower hardware requirement which only needs a mask with sparse sub-aperture configuration.

On-sky results for the novel integrated micro-lens ring tip-tilt sensor

On-sky results for the integrated microlens ring tip-tilt sensor

Micro-lens array as tip-tilt sensor for single-mode fiber coupling

Demonstration of a photonic lantern low order wavefront sensor using an adaptive optics testbed

Final Design and On-Sky Testing of the iLocater SX Acquisition Camera: Broadband Single-Mode Fiber Coupling

Final design and on-sky testing of the iLocater SX acquisition camera: broad-band single-mode fibre coupling

Striving towards robust phase diversity on-sky: Implementing LIFT for VLT/MUSE-NFM

Striving towards robust phase diversity on-sky

Infrared tip-tilt sensing: on-sky experience, lessons learned and unsolved problems

Multi-tip/tilt errors simultaneous detection for segmented telescopes based on coherent diffraction

Development of Linear Astigmatism Free -- Three Mirror System (LAF-TMS)

In-lab and On-sky Closed-loop Results of Adaptive Secondary Mirrors with TNO's Hybrid Variable Reluctance Actuators

Metasurface-based Toroidal Lenslet Array Design for Addressing Laser Guide Star Elongation

Centroiding and Extraction of Tip/Tilt Information from Nonlinear Curvature Wavefront Sensor Measurements

Development of an ELT XAO testbed using a Mach-Zehnder wavefront sensor: calibration of the deformable mirror

First laboratory and on-sky results of an adaptive secondary mirror with TNO-style actuators on the NASA Infrared Telescope Facility

The MICADO first light imager for the ELT: off-axis performance of PSF reconstruction

SMART: Special-shaped Micro-lens Aimer for Real-time Targeting of multi-object telescopes

Mach-Zehnder interferometer for piston and tip-tilt sensing in segmented telescopes: theory and analytical treatment

Real-time experimental demonstrations of a photonic lantern wavefront sensor

A physical optics characterization of the beam shape and sidelobe levels for the Atacama Large Aperture Submillimeter Telescope (AtLAST)