Abstract:In the telescope observation, the position of fiber will highly influence the spectra efficient input in the fiber to the spectrograph. When the fibers were back illuminated on the spectra end, they would export light on the positioner end, so the CCD cameras could capture the photo of fiber tip position covered the focal plane, calculates the precise position information by light centroid method and feeds back to control system. A set of fiber back illuminated system was developed which combined to the low revolution spectro instruments in LAMOST. It could provide uniform light output to the fibers, meet the requirements for the CCD camera measurement. The paper was introduced the back illuminated system design and different test for the light resource. After optimization, the effect illuminated system could compare with the integrating sphere, meet the conditions of fiber position measurement.Using parallel controlled fiber positioner as the spectroscopic receiver is an efficiency observation system for spectra survey, has been used in LAMOST recently, and will be proposed in CFHT and rebuilt telescope Mayall. In the telescope observation, the position of fiber will highly influence the spectra efficient input in the fiber to the spectrograph. When the fibers were back illuminated on the spectra end, they would export light on the positioner end, so the CCD cameras could capture the photo of fiber tip position covered the focal plane, calculates the precise position information by light centroid method and feeds back to control system. After many years on these research, the back illuminated fiber measurement was the best method to acquire the precision position of fibers. In LAMOST, a set of fiber back illuminated system was developed which combined to the low revolution spectro instruments in LAMOST. It could provide uniform light output to the fibers, meet the requirements for the CCD camera measurement and was controlled by high-level observation system which could shut down during the telescope observation. The paper was introduced the back illuminated system design and different test for the light resource. After optimization, the effect illuminated system could compare the integrating sphere, meet the conditions of fiber position measurement.

SMART: Special-shaped Micro-lens Aimer for Real-time Targeting of multi-object telescopes

Method for Active Spatial Alignment and Stabilization of Laser Beams in Multi-Beam Systems

Artificial Compound Eye-Tipped Optical Fiber for Wide Field Illumination.

HIGH-PRECISION ASTROMETRY WITH A DIFFRACTIVE PUPIL TELESCOPE

Optical alignment technology for 1-meter accurate infrared magnetic system telescope

Combining Bundle Adjustment and Laser Tracker for Precise Position Measurement of Fiber Ends

Research on Reference Fiber for Closed-Loop Measurement of Spectral Survey Telescope

Metasurface-based Toroidal Lenslet Array Design for Addressing Laser Guide Star Elongation

A multi-functional fiber positioning system for Extremely Large Telescopes

Alignment Technology Based on a Central Small Aperture for the AIMS Telescope.

Precise measurement of fibers position using bundle adjustment algorithm

Back-illuminate Fiber System Research for Multi-Object Fiber Spectroscopic Telescope

Design and study of visual fast detecting instrument for fiber positioners

Precision Control and Performance of New-Generation Integrated Fiber Positioners for LAMOST

A Wide-Field and High-Resolution Lensless Compound Eye Microsystem for Real-Time Target Motion Perception

Research of Fiber Position Measurement by Multi Ccd Cameras

Photonics Scanning Pentaprism System for the Integrated Inspection of Large-Aperture Telescopes

A High-Density Integrated Optical Focal Plane Positioning System

Anti-scattering Light Focusing by Fast Wavefront Shaping Based on Multi-Pixel Encoded Digital-Micromirror Device

A 30-M Submillimeter Telescope with Active Reflector

Optical Fiber Vision Positioning System Based on Reference Fiber for LAMOST