Abstract:In the telescope observation, the position of fiber will highly influence the spectra efficient input in the fiber to the spectrograph. When the fibers were back illuminated on the spectra end, they would export light on the positioner end, so the CCD cameras could capture the photo of fiber tip position covered the focal plane, calculates the precise position information by light centroid method and feeds back to control system. A set of fiber back illuminated system was developed which combined to the low revolution spectro instruments in LAMOST. It could provide uniform light output to the fibers, meet the requirements for the CCD camera measurement. The paper was introduced the back illuminated system design and different test for the light resource. After optimization, the effect illuminated system could compare with the integrating sphere, meet the conditions of fiber position measurement.Using parallel controlled fiber positioner as the spectroscopic receiver is an efficiency observation system for spectra survey, has been used in LAMOST recently, and will be proposed in CFHT and rebuilt telescope Mayall. In the telescope observation, the position of fiber will highly influence the spectra efficient input in the fiber to the spectrograph. When the fibers were back illuminated on the spectra end, they would export light on the positioner end, so the CCD cameras could capture the photo of fiber tip position covered the focal plane, calculates the precise position information by light centroid method and feeds back to control system. After many years on these research, the back illuminated fiber measurement was the best method to acquire the precision position of fibers. In LAMOST, a set of fiber back illuminated system was developed which combined to the low revolution spectro instruments in LAMOST. It could provide uniform light output to the fibers, meet the requirements for the CCD camera measurement and was controlled by high-level observation system which could shut down during the telescope observation. The paper was introduced the back illuminated system design and different test for the light resource. After optimization, the effect illuminated system could compare the integrating sphere, meet the conditions of fiber position measurement.

Design and study of visual fast detecting instrument for fiber positioners

The Fiber View Metrology System Design for Spectral Survey Telescope

Research of Fiber Position Measurement by Multi Ccd Cameras

Accuracy Research for Survey Telescope Fiber Position Measurement

A New Fiber Detection Method for LAMOST Based on the Front-illuminated Method

Research on Reference Fiber for Closed-Loop Measurement of Spectral Survey Telescope

A New Metrology Method for Optical Fiber Position Detection

Fiber Position Measurement Method in LAMOST Based on External Planar Target

Precision Control and Performance of New-Generation Integrated Fiber Positioners for LAMOST

The Improvement of LAMOST Fiber View Camera Metrology System Fiber Position Recognition Algorithm

Multitarget Fiber High-Precision Position Detection Method Based on a Front Light Source

Optical Fiber Vision Positioning System Based on Reference Fiber for LAMOST

Optical fiber positioning technology for LAMOST

Research on the Fiducial Fibre Coding and Identification Algorithm of the LAMOST Fibre Positioning System

Back-illuminate Fiber System Research for Multi-Object Fiber Spectroscopic Telescope

Photogrammetry-based Metrology of Fiber Positioner in LAMOST

Research on positioning parameters of LAMOST fiber units

Analysis of LAMOST Optical Fiber Positioning Units Closed-Loop Operation by Dual-Telecentric Measurement System

Implementary Scheme of Parallel Controllable Optical Fiber Positioning System for Lamost

New Type Optical Fiber Positioning Unit Device for Lamost

Dynamic Position Accuracy Analysis of Fiber Positioner