A New Fiber Detection Method for LAMOST Based on the Front-illuminated Method
Ming Zhou,Yong Zhang,Guanru Lv,Jian Li,Zengxiang Zhou,Zhigang Liu,Jianping Wang,Zhongrui Bai,Yuan Tian,Mengxin Wang,Shuqing Wang,Hongzhuan Hu,Chao Zhai,Jiaru Chu,Zhijie Han,Mingxu Liu,Yiqiao Dong,Hailong Yuan,Yongheng Zhao,Yaoquan Chu,Haotong Zhang
DOI: https://doi.org/10.1088/1674-4527/ac6734
2022-01-01
Research in Astronomy and Astrophysics
Abstract:The double revolving fiber positioning technology is one of the key technologies for the success of the Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST). The accuracy of fiber positioning will directly affect the observation efficiency of LAMOST. To achieve higher fiber positioning accuracy, the original open-loop controlled fiber positioning system urgently needs to be upgraded into a closed-loop control system. The fiber detection is the most important part of the closed-loop controlled fiber positioning system. The back-illuminated detection method is usually used to detect the fiber position by directly detecting the light spot generated at the fiber end in the multi-fiber spectral surveys. In this paper, we introduce a new method to measure the fiber position based on the image of the front-illuminated LAMOST focal plane. The front-illuminated image does not require lighting devices inside the spectrograph, and it could reduce the instability and light pollution in the spectrograph end. Our method measures the fiber position by fitting the profile of the fiber pinhole with a 2D Gaussian function. A series of tests show that the relative position measurement precision of the front-illuminated method is about 0.″12, and the method could have the same accuracy as the back-illuminated method once the system bias is calibrated by a simple radial correction function. The required fiber positioning accuracy of LAMOST is 0.″4, and the new method satisfies the requirement of LAMOST fiber detection accuracy and could be used in the closed-loop fiber control system.