Investigation of the effects of particle size on the performance of classical gravity concentration equipment

Damla Izerdem,S. Levent Ergun
DOI: https://doi.org/10.1080/08827508.2022.2132943
2022-10-16
Mineral Processing and Extractive Metallurgy Review
Abstract:The use of gravity concentrators involves several challenges, such as determination of the liberation sizes of the minerals, selection of appropriate particle sizes for the applied concentration method, and the severity of the beneficiation of fines.In this study, the effects of fully liberated (artificial mixtures of magnetite and quartz) and non-liberated particles (chromite ore collected from a chromite processing plant) on various gravity concentration equipment were investigated as a function of particle size considering recoveries, separation efficiencies, and grades of products. A series of tests were conducted on shaking tables, spiral concentrators, and a Falcon concentrator with different design features under various operating conditions. Finally, the separation efficiencies were correlated with the settling rates of the particles.The test results confirmed a certain trend in the separation efficiency as a function of particle size for each condition. The separation efficiency initially increased with increasing particle size, peaked, and eventually decreased with increasing particle size. The maximum separation efficiency attained was 90% for 141 μm particles in the shaking table and 54% for 245 μm particles in the Falcon concentrator, both of which were used to treat the artificial feed. In the spiral concentrator, which treated chromite ore as feed, the maximum separation efficiency attained was 82% for 178 μm particles.This experimental study provides data to identify the concentration behavior of particles by investigating possible separation mechanisms. Consequently, it provides an understanding of the relationships between particle size and separation efficiency in terms of settling rates, especially in spiral concentrators.
metallurgy & metallurgical engineering,mining & mineral processing
What problem does this paper attempt to address?