Abstract:Red mud, which could cause numerous problems to the environment, is a hazardous waste generated from the alumina smelting industry. In general, the storage and harmless utilization of red mud are hard to implement due to its fine particle size and high alkalinity. This study put forward a novel process to separate iron (MgFe2O4) and alumina (Al2O3) in red mud by a magnetization sintering method. The magnesium oxide was added to transform the nonmagnetic Fe2O3 into magnetic MgFe2O4 to achieve physical separation of iron-bearing minerals, and the alumina-bearing minerals were converted into dissoluble NaAlO2 minerals in a one-step reaction. The atmospheric pressure leaching process was adopted in this study for alumina resource recovery. To achieve clean alumina production, the silicate in the leaching solution was removed by adding the slightly soluble CaSO4, and the entire process becomes clean and harmless. The feasibility of the process was verified by thermodynamic analysis, and a series of experiments were performed to detect the optimum MgO/(Fe2O3 + MgO) ratio and the calcining and leaching conditions. The morphological and mineralogical characteristics of modified red mud, leaching red mud, and magnetic separation product were studied by X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) energy dispersive spectroscopy (EDS). It was observed that under the optimal conditions with MgO/(Fe2O3 + MgO) of 14.89% to recover iron and aluminum, the corresponding recovery rates were 67.54% and 73.01% respectively, and the iron grade was 30.46%. The EDS results showed that the obtained Mg/Fe ratio of the magnetic separation product was 0.4677–0.528, which is slightly different from that of the standard MgFe2O4 at 0.5. This new method can promote the development of comprehensive utilization of red mud and iron production.

Influence of particle size on the magnetism of magnetite and the development of an energy-efficient three-product magnetic separator

A three-product magnetic-separation column: influence of compound force field on the settlement of magnetite

Mechanical characteristics of magnetite as a function of particle size during column-based magnetic separation

Development and performance of a permanent magnet pulsating separator

A Study of Processing High-Grade Magnetite Concentrates by Combination of Magnetic Separation and Reverse Flotation Separation to Prepare Raw Materials for Ferrite Magnet

Development of a centrifugal dry magnetic separator for separation of fine magnetite ore

Selective separation of magnetite and fayalite based on particle size effect: Flotation behavior and application of stepwise separation process

Enhancing the separation of refractory weakly magnetic minerals with magnetic fluid in high gradient magnetic separation: Conversion of competing capture to mechanical entrainment

Effects of magnet arrangement on the separation behavior of magnetic particles in high-concentration suspensions based on numerical simulations: Magnetic force induced eddies

A magnetophoretic microdevice for multi-magnetic particles separation based on size: a numerical simulation study

Effects of particle size on the separation efficiency in a rotary-drum eddy current separator

Application of Magnetic Separation Technology in Resource Utilization and Environmental Treatment

Various rare earth particles magnetic separation using magnetic fluid and paramagnetic liquid

New development of compact magnetic separator for on-site material screening in various geological survey

Magnetite Fe3O4 Nanoparticles and Hematite Α-Fe2o3 Uniform Oblique Hexagonal Microdisks, Drum-Like Particles and Spindles and Their Magnetic Properties

Influence of different comminution flowsheets on the separation of vanadium titano-magnetite

Size Influence to the High-Frequency Properties of Granular Magnetite Nanoparticles

Comparison of various forces acting on magnetic particles in a low-intensity magnetic field: A 3D FEA

An efficient and green method to separate iron and manganese from ferromanganese ore by suspension magnetization roasting and magnetic separation

Extraction of Iron and Alumina from Red Mud with a Non-Harmful Magnetization Sintering Process

Properties of flash roasted products from low-grade refractory iron tailings and improvement method for their magnetic separation index