Abstract:The most common beneficiation method for feldspar is flotation with a cationic (amine) collector under acidic conditions. However, there are several disadvantages to this, such as environmental pollution and equipment corrosion. In order to resolve such problems, it is important to study the flotation of feldspar using anionic collectors under natural pH conditions. The purpose of this paper is to study the effects and mechanism of Fe3+ on flotation separation of feldspar and epidote using sodium oleate (NaOL) at a natural pH. Through flotation experiments, adsorption measurements, zeta potential testing, FTIR analysis and X-ray photoelectron spectroscopy (XPS), the mechanism of Fe3+ on the surface of feldspar and epidote is revealed, and the reason behind the difference in flotation of the two minerals is discussed. The flotation test results show that Fe3+ can significantly improve the flotation behavior of minerals when NaOL is used as a collector under natural pH, and the highest recovery rates of feldspar and epidote are 90% and 43%, respectively. Analysis of the solution and adsorption measurement results show that Fe3+ is adsorbed on the minerals′ surface in the form of Fe(OH)3, which promotes the adsorption of NaOL on the minerals’ surface through Fe(OH)3, activating the flotation of feldspar and epidote. The difference in adsorption of Fe3+ between feldspar and epidote is the reason for this difference in flotation behavior. The results of the zeta potentials show that after being treated with Fe3+, the electrostatic adsorption of NaOL displays a significant negative shift on the surface of feldspar, while there is almost no electrostatic adsorption of NaOL on the surface of Fe3+-treated epidote. FTIR analysis confirmed that the difference in the adsorption of Fe3+ and NaOL on the surface of feldspar and epidote is due to the fact that there are more active particles (metal bonds) on the surface of feldspar than on the surface of epidote, and the properties of these metal bonds can be changed by Fe3+, which allows NaOL to be more easily adsorbed on the mineral surface through –COO−. The possible adsorption form is “mineral-Fe3+–COO−“. Compared with the infrared spectrum of epidote, there is a new absorption peak at 1713.68 cm−1, which can be attributed to the C=O characteristic peak of NaOL in the infrared spectrum of Fe3+–NaOL-treated feldspar, which is why the floatability of feldspar is better than epidote. XPS confirmed that the Fe on the surface of feldspar is Fe3+ in the form of Fe(OH)3, while Fe on the surface of epidote is mainly Fe2O3 (Fe–O) contained in mineral crystals. Furthermore, there is less adsorption of Fe3+ on the surface of epidote, and this discrepancy leads to the difference in the adsorption of NaOL on the minerals’ surface, which itself leads to the difference in flotation behavior between feldspar and epidote. These findings indicate that the flotation separation of feldspar and epidote can be achieved using Fe3+ and NaOL under natural pH. This study may provide a reference for the flotation mechanism of feldspar and epidote under natural pH.

Selective separation of magnetite and fayalite based on particle size effect: Flotation behavior and application of stepwise separation process

Decoupling the effects of solid and liquid phases in a Pb-water glass mixture on the selective flotation separation of scheelite from calcite

Effect of Grinding Media on the Flotation Behavior of Fluorite Using Sodium Oleate As a Collector

Recovery of Phosphorite from Coarse Particle Magnetic Ore by Flotation

Effect of different particle size fractions on flotation separation of fine rutile from garnet

Selective adsorption mechanism of polyoxyethylene alkyl amine in reverse flotation separation of fayalite and magnetite without depressant

Influence of Particle Size on Flotation Separation of Ilmenite and Forsterite

Mechanism of Fe(III)-modified silicate in the flotation separation of spodumene and albite: An experimental and theoretical study

Mechanical characteristics of magnetite as a function of particle size during column-based magnetic separation

Separation of ultra-fine hematite and quartz particles using asynchronous flocculation flotation

Influence of particle size on the magnetism of magnetite and the development of an energy-efficient three-product magnetic separator

Selective Flocculation Separation of Fine Hematite from Quartz Using a Novel Grafted Copolymer Flocculant

Efficient selective flotation separation of fluorite from calcite using ferrous and ferric species as combined depressant

Intensifying Fine-Grained Fluorite Flotation Process with a Combination of In-Situ Modification and Liquid-Gas Microdispersion

Enhancing flotation separation of fine copper oxide from silica by microbubble assisted hydrophobic aggregation

A Study of Processing High-Grade Magnetite Concentrates by Combination of Magnetic Separation and Reverse Flotation Separation to Prepare Raw Materials for Ferrite Magnet

Improving micro-fine mineral flotation via micro/nano technologies

Reverse flotation of ultrafine magnetic concentrate by using mixed anionic/cationic collectors

The selective adsorption and flotation separation of spodumene from feldspar using a novel iron-group multiple ligand collector

Effects and Mechanism of Fe3+ on Flotation Separation of Feldspar and Epidote with Sodium Oleate at Natural pH

Effect of sodium silicate modified with Fe2+ and Al3+ as dispersant on flotation of molybdenite and chalcopyrite in presence of kaolinite and seawater