Abstract:The separation of rare earths (REs) and aluminum (Al) has always been a practical challenge in the rare earth industry. In this paper, the effects of contact time, the concentrations of Al 3+ and RE 3+ on the extraction and separation of REs and Al during the solvent extraction of low-concentration rare earth sulfate solution using P507 were investigated. Significant differences in the extraction kinetics between REs and Al can be observed at the same contact time. For instance, when the contact time is 10 s, the extraction efficiency of Y reaches up to 97.5 %, whereas that of Al is only 9.1 %. Under the conditions of initial pH of the rare earth solution 4.0, Al 3+ concentration 0–20.0 mmol/L, and RE 3+ concentration 1.5–12.0 mmol/L, both the separation factors of Gd/Al ( β Gd/Al ) and Y/Al ( β Y/Al ) are higher than 100 at the contact time of 10–300 s, indicating that M−HREs can be easily separated from Al through solvent extraction using P507. The separation factors of La/Al ( β La/Al ) and Nd/Al ( β Nd/Al ) are 10.8–12.3 and 40.5–58.7, respectively, at the contact time of 15–30 s, which are much lower than those of M−HRE (such as Gd and Y), but are much higher than those at the contact time of 300 s ( β La/Al = 2.8, β Nd/Al = 31.5). It means that the separation of LRE and Al serves as the key for the separation of REs and Al in the low-concentration rare earth solution, and controlling the contact time in the range of 15–30 s is conducive to the separation of LREs from the Al. The increase in the Al 3+ concentration in the rare earth solution has no significant impact on the separation of REs and Al at the contact time of 10–60 s, but the increase in the RE 3+ concentration induces the separation of REs and Al. In conclusion, REs in the low-concentration rare earth solution can be selectively separated from the Al via centrifugal extraction technology.

Various rare earth particles magnetic separation using magnetic fluid and paramagnetic liquid

STUDY ON APPLICATION OF MAGNETIC SEPARATION IN EXTRACTING SC FROM RARE EARTH ORE

High Gradient Magnetic Separation of Pure Gd2O3 Particles from Pure La2O3 Particles

Microfluidic Separation of Magnetic Particles with Soft Magnetic Microstructures

Efficient Oil-Water Separation with Amphipathic Magnetic Nanoparticles of Fe3O4@TiO2

Enhancing the separation of refractory weakly magnetic minerals with magnetic fluid in high gradient magnetic separation: Conversion of competing capture to mechanical entrainment

Fast Extraction of Rare Earth Mixtures by Membrane Dispersion Micro-Extractors

A three-product magnetic-separation column: influence of compound force field on the settlement of magnetite

A Study of Processing High-Grade Magnetite Concentrates by Combination of Magnetic Separation and Reverse Flotation Separation to Prepare Raw Materials for Ferrite Magnet

Scalable high-throughput microfluidic separation of magnetic microparticles

Processing a rare earth mineral deposit using gravity and magnetic separation

Research on the Density of Magnetic Fluid and its Application in Mineral Separation

A magnetophoretic microdevice for multi-magnetic particles separation based on size: a numerical simulation study

Solvent-driven fractional crystallization for atom-efficient separation of metal salts from permanent magnet leachates

Extraction of Rare Earth Metal Ions with an Undiluted Hydrophobic Pseudoprotic Ionic Liquid

Separation of rare earth elements by synergistic solvent extraction with phosphonium-based ionic liquids using a β-diketone extractant and a neutral ligand

Selective separation of rare earths and aluminum from low-concentration rare earth solution via centrifugal extraction

A new strategy of thin oil film extraction for enhanced recovery and separation of praseodymium and neodymium

Fast Extraction and Enrichment of Rare Earth Elements from Waste Water Via Microfluidic-Based Hollow Droplet

A microfluidic study of synergic liquid-liquid extraction of rare earth elements.

Multistage Magnetic Separation of Microspheres Enabled by Temperature-Responsive Polymers