Abstract:The existence of carbon monoxide (CO) in industrial boilers flue gas can suppress the performance of the selective catalytic reduction with NH 3 (NH 3 -SCR) for NO x removal at low temperatures over the Mn-based catalyst, and the related mechanism is needed to be revealed for improving the NH 3 -SCR performance. In this work, the effects of CO on the NH 3 -SCR performance over MnSm/Ti catalyst were studied, and the CO tolerance of the catalyst with cobalt (Co) modification at low temperatures was evaluated. The DFT calculations were performed to reveal the mechanism for the modification of Co over the MnSm/Ti catalyst. The NO x conversion for MnSm/Ti catalyst decreased by 15.2%-21.4% at 150–300 °C due to the presence of CO in the NH 3 -SCR reaction atmosphere. After introducing Co into MnSm/Ti catalyst, the NO x conversion for MnSmCo/Ti catalyst only decreased by 8.9%-13.8% at 150–300 °C with the presence of CO. It was evidenced that the CO tolerance of the MnSm/Ti catalyst was enhanced with the Co modification. The characterizations of catalysts revealed that the adsorptions of NH 3 and NO over the MnSm/Ti catalyst were inhibited by the presence of CO in the mixed atmosphere. Furthermore, the presence of CO in the flue gas resulted in the formation of carbonates, bicarbonates, and bridging formate on the surface of the MnSm/Ti catalysts, which would cause a decrease in the content of Mn 4+ and O α on the surface of the catalyst surface. Introducing Co into MnSm/Ti catalyst could enhance the adsorption of NH 3 by forming more Lewis acid sites over the MnSmCo/Ti catalyst. The contents of Mn 4+ and O α over MnSmCo/Ti catalyst were increased via the strong electronic interaction between Co ions and Mn ions. DFT calculations proved that the adsorption of CO over the catalyst was suppressed by the modification of Co with the change of the adsorption energy of CO from −167.25 kJ/mol to −53.82 kJ/mol. Additionally, the Co modification facilitated the decomposition of the carbonate formed over the catalyst with the energy barrier of related reactions decreasing from 214.67 kJ/mol to 24.45 kJ/mol, thus improving the CO tolerance of the catalyst.

Preparation and Characterization of Co-Modified Bimetallic MOF-74-NiCo as an Efficient Catalyst for Low Temperature CO-SCR

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

Co-modified Ni/N-doped Carbon As Electrocatalysts for HER and OER

Selective Catalytic Reduction of NOx by CO over Doubly Promoted MeMo/Nb2O5 Catalysts (Me = Pt, Ni, or Co)

Synthesis of novel Co(3-x)MnxO4@TiO2 core-shell catalyst for low-temperature NH3-SCR of NOx with enhanced SO2 tolerance

Cobalt doped Fe-Mn@CNTs catalysts with highly stability for low-temperature selective catalytic reduction of NOx

Study on the performance of magnetic Co3O4/γ-Fe2O3 catalyst in NO + CO reaction

Boosting Low-Temperature NH3-SCR Performance Via Mixed-Valence Cobalt Dual Active Sites

One-step synthesis by redox co-precipitation method for low-dimensional Me-Mn bi-metal oxides (Me=Co, Ni, Sn) as SCR DeNOx catalysts

Copper-based catalysts supported on novel Metal-Organic Framework MIL-125(Ti) for selective catalytic reduction of NO with CO

Ni enhanced reactivity of Fe/TiO 2 for selective catalytic reduction of NO with CO and the mechanism investigation

Efficient simultaneous removal of NOx and CO at low temperatures over integrated Mn2Co1Ox/iron mesh monolithic catalyst via NH3-SCR coupling with CO oxidation reactions

Multi-phase coexisting metal oxide derived by MOFs for the CO-SCR reaction at low temperature and in situ DRIFTS study on reaction mechanism

MOF-74-M (M = Mn, Co, Ni, Zn, MnCo, MnNi, and MnZn) for Low-Temperature NH 3 -SCR and In Situ DRIFTS Study Reaction Mechanism

Modification of MnCo<sub>2</sub>O<sub>x</sub> catalysts by NbO<sub>x</sub> for low temperature selective catalytic reduction of NO with NH<sub>3</sub>

Modification of Mnco2ox Catalysts by Nbox for Low Temperature Selective Catalytic Reduction of No with Nh3

Getting insight into the CO tolerance over Co-modified MnSm/Ti catalyst for NH 3 -SCR of NO x at low temperature: Experiments and DFT studies

ABATEMENT OF HARMFUL CARBON MONOXIDE OVER THE NICKLE DOPED CO3 O4 CATALYST

Design of robust Co-doped Mn3O4 spinel catalysts for selective catalytic reduction of NO with NH3 at low temperatures

Hierarchically interconnected porous Mn Co3-O4 spinels for Low-temperature catalytic reduction of NO by CO

Co Single Atoms and CoOx Nanoclusters Anchored on Ce0.75Zr0.25O2 Synergistically Boosts the NO Reduction by CO