Abstract:The existence of carbon monoxide (CO) in industrial boilers flue gas can suppress the performance of the selective catalytic reduction with NH 3 (NH 3 -SCR) for NO x removal at low temperatures over the Mn-based catalyst, and the related mechanism is needed to be revealed for improving the NH 3 -SCR performance. In this work, the effects of CO on the NH 3 -SCR performance over MnSm/Ti catalyst were studied, and the CO tolerance of the catalyst with cobalt (Co) modification at low temperatures was evaluated. The DFT calculations were performed to reveal the mechanism for the modification of Co over the MnSm/Ti catalyst. The NO x conversion for MnSm/Ti catalyst decreased by 15.2%-21.4% at 150–300 °C due to the presence of CO in the NH 3 -SCR reaction atmosphere. After introducing Co into MnSm/Ti catalyst, the NO x conversion for MnSmCo/Ti catalyst only decreased by 8.9%-13.8% at 150–300 °C with the presence of CO. It was evidenced that the CO tolerance of the MnSm/Ti catalyst was enhanced with the Co modification. The characterizations of catalysts revealed that the adsorptions of NH 3 and NO over the MnSm/Ti catalyst were inhibited by the presence of CO in the mixed atmosphere. Furthermore, the presence of CO in the flue gas resulted in the formation of carbonates, bicarbonates, and bridging formate on the surface of the MnSm/Ti catalysts, which would cause a decrease in the content of Mn 4+ and O α on the surface of the catalyst surface. Introducing Co into MnSm/Ti catalyst could enhance the adsorption of NH 3 by forming more Lewis acid sites over the MnSmCo/Ti catalyst. The contents of Mn 4+ and O α over MnSmCo/Ti catalyst were increased via the strong electronic interaction between Co ions and Mn ions. DFT calculations proved that the adsorption of CO over the catalyst was suppressed by the modification of Co with the change of the adsorption energy of CO from −167.25 kJ/mol to −53.82 kJ/mol. Additionally, the Co modification facilitated the decomposition of the carbonate formed over the catalyst with the energy barrier of related reactions decreasing from 214.67 kJ/mol to 24.45 kJ/mol, thus improving the CO tolerance of the catalyst.

Efficient simultaneous removal of NOx and CO at low temperatures over integrated Mn2Co1Ox/iron mesh monolithic catalyst via NH3-SCR coupling with CO oxidation reactions

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

Simultaneously achieving selective catalytic reduction of NOx with NH3 and catalytic oxidation of CO with O2 over one finely optimized bifunctional catalyst Mn2Cu1Al1Ox at low temperatures

Surface Tailoring on Bifunctional CuOx/MnO2 Catalyst to Promote the Selective Catalytic Reduction of NO with NH3 and Oxidation of CO with O2

Bifunctional Mn-Cu-CeOx/γ-Al2O3 catalysts for low-temperature simultaneous removal of NOx and CO

Selective catalytic reduction of nitric oxide with carbon monoxide over alumina-pellet-supported catalysts in the presence of excess oxygen

New insights and reaction mechanisms in the design of catalysts for the synergistic removal of NOx and VOCs from coke oven flue gas: Dual regulation of oxidative properties and acidic sites

Simultaneous abatement of NO x and CO using tandem catalyst system via reactant- and energy- Co-promoting effect

Interactions between CO oxidation and selective catalytic reduction of NO with NH3 over Mn-based catalysts

Optimization of catalytic activity of MnCoOx catalyst for NH3–SCR at low temperature by response surface method

Design of robust Co-doped Mn3O4 spinel catalysts for selective catalytic reduction of NO with NH3 at low temperatures

Getting insight into the CO tolerance over Co-modified MnSm/Ti catalyst for NH 3 -SCR of NO x at low temperature: Experiments and DFT studies

Mn-Based Catalysts in the Selective Reduction of NOx with CO: Current Status, Existing Challenges, and Future Perspectives

Low-temperature SCR of NO with NH3 over AC/C Supported Manganese-Based Monolithic Catalysts

Synthesis of novel Co(3-x)MnxO4@TiO2 core-shell catalyst for low-temperature NH3-SCR of NOx with enhanced SO2 tolerance

Superior Room-Temperature Efficacy of Selective Catalytic Reduction of NO X by CO Utilizing Metal-Modified Fe 2 O 3 Catalysts

Bifunctional Catalyst of CuMn-HZSM-5 for Selective Catalytic Reduction of NO and CO Oxidation under Oxygen Atmosphere

Hollow Mn-doped CeO2@Co3O4 catalyst for NO reduction by CO

Spinel Structured CoaMnbOx Mixed Oxide Catalyst for the Selective Catalytic Reduction of NOx with NH3

Efficient Catalysis for Low-Temperature CO Selective Catalytic Reduction over an Fe-Cu Bimetal Oxide Catalyst Supported on Amorphous SiO2

Three-Dimensional Spherical CuCoAlO<sub>X</sub> Catalyst with a Micro-/ Nanoporous Structure for Low-Temperature CO-SCR Denitration