Abstract:A series of samples with the precursor's molar ratio of {KMn8O16}/{CuFe2O4} = 0, 0.008, 0.010, 0.016, and 0.020 were successfully synthesized for selective catalytic reduction of NO by CO. The physicochemical properties of all samples were studied in detail by combining the means of X-ray photoelectron spectroscopy, H2-temperature-programmed reduction, scanning electron microscopy mapping, X-ray diffraction (XRD), N2 physisorption (Brunauer-Emmett-Teller), NO + CO model reaction, and in situ Fourier transform infrared spectroscopy techniques. The results show that three phases of γ-Fe2O3, CuFe2O4, and CuO, which have strong synergistic interaction, coexist in this catalyst system, and different phases play a leading role in different temperature ranges. Mn species are highly dispersed in the three-phase coexisting system in the form of Mn2+, Mn3+, and Mn4+. Because of the strong interaction between Mn2+ and Fe species, a small amount of Cu2+ precipitates from CuFe2O4 and grows along the CuO(110) plane, which has better catalytic performance. Mn3+ can inhibit the conversion of γ-Fe2O3 to α-Fe2O3 at high temperature and then increases the high-temperature activity. The synergistic effect between Mn4+ and the surfaces of three phases generates active oxygen species Cu2+-O-Mn4+ and Mn4+-O-Fe3+, which can be more easily reduced to some synergistic oxygen vacancies during the reaction. Furthermore, the formed synergistic oxygen vacancies can promote the dissociation of NO and are also propitious to the transfer of oxygen species. All of these factors make the appropriate manganese-modified three-phase coexisting system have better catalytic activity than the manganese-free catalyst, making NO conversion rate reach 100% at around 250 °C and maintain to 1000 °C. Combining comprehensive analysis of various characterization results and in situ infrared as well as XRD results in the equilibrium state, a new possible NO + CO model reaction mechanism was temporarily proposed to further understand the catalytic processes.

New insights and reaction mechanisms in the design of catalysts for the synergistic removal of NOx and VOCs from coke oven flue gas: Dual regulation of oxidative properties and acidic sites

Modulation of acidic and redox properties of Mn-based catalysts by Co doping: Application to the synergistic removal of NO x and chlorinated organics

Unveiling the remarkable deNOx performance of MnMoVOx catalysts via dual regulation of the redox and acid sites

Efficient simultaneous removal of NOx and CO at low temperatures over integrated Mn2Co1Ox/iron mesh monolithic catalyst via NH3-SCR coupling with CO oxidation reactions

Mechanistic Investigation of the Enhanced SO2 Resistance of Co-modified MnOx Catalyst for the Selective Catalytic Reduction of NOx by NH3

Synergistic Removal of NOx and VOCs from Flue Gas on Mn-Based Catalysts

Bifunctional catalysts V-Cu/TiO 2 for selective catalytic reduction of NO x and CO oxidation under oxygen-rich conditions

Synergistic catalytic removal of NOx and chlorinated organics through the cooperation of different active sites

Mn-Based Catalysts in the Selective Reduction of NOx with CO: Current Status, Existing Challenges, and Future Perspectives

Ternary MnCoVO catalysts with remarkable deNO performance: Dual acid-redox sites control strategy

Surface Tailoring on Bifunctional CuOx/MnO2 Catalyst to Promote the Selective Catalytic Reduction of NO with NH3 and Oxidation of CO with O2

Synergistic effects in Mn-Co mixed oxide supported on cordierite honeycomb for catalytic deep oxidation of VOCs

Mn-Modified CuO, CuFe2O4, and Γ-Fe2o3 Three-Phase Strong Synergistic Coexistence Catalyst System for NO Reduction by CO with a Wider Active Window.

Unraveling the multi-pollutant removal using M-MoWTi (M = Fe, Mn, Cr) catalyst: experiment and mechanistic study of competition for active sites

The Synergistic Catalysis of Chloroaromatic Organics and NOx over Monolithic Vanadium-Based Catalysts at Low Temperature

Design of bimetallic catalyst with dual-functional Cu-Ce sites for synergistic NO X and toluene abatement

Design of Bifunctional Cu-SSZ-13@Mn 2 Cu 1 Al 1 O x Core–Shell Catalyst with Superior Activity for the Simultaneous Removal of VOCs and NO x

Copper/Nickel/Cobalt modified molybdenum-tungsten-titanium dioxide-based catalysts for multi-pollution control of nitrogen oxide, benzene, and toluene: Enhanced redox capacity and mechanism study

Unveiling the Promoting Mechanism of Mo on the Performance of CuCeOx Catalyst for Simultaneously NH3-SCR Denitration and CO Oxidation under Oxygen-Rich Conditions

Spinel Structured CoaMnbOx Mixed Oxide Catalyst for the Selective Catalytic Reduction of NOx with NH3

Bifunctional Mn-Cu-CeOx/γ-Al2O3 catalysts for low-temperature simultaneous removal of NOx and CO