Underwater Wire-Feed Laser Deposition of Thin - Walled Tubular Structure of Aluminum Alloy
Qi Cheng,Ning Guo,Yunlong Fu,Di Zhang,Guanghui Wang,Mengqiu Yu
DOI: https://doi.org/10.1016/j.jmapro.2021.04.032
IF: 5.684
2021-01-01
Journal of Manufacturing Processes
Abstract:Thin-walled aluminum alloy tube of underwater laser in-situ deposition technique was carried out for the first time, and the influences of laser powers, wire feeding speeds and shielding gas flow rates on the deposition appearance, geometry characteristics, microstructure and microhardness of single track deposited layer were investigated. As the laser power increased, the height of deposited region (DR) and deposition angle decreased, but the height of fusion region (FR) and the width increased. Besides, the deposition appearance became better firstly and then worse. With the wire feeding speed increased, the height of DR, width and deposition angle increased, but the height of FR decreased. In addition, the deposition appearance was greatly improved. As the shielding gas flow rate increased, the height of DR and deposition angle decreased, but the height of FR and width increased. Besides, the deposition appearance deteriorated. The microstructure of FR and DR were columnar dendrites and equiaxial dendrites, respectively. With wire feeding speed increased, the microstructure had a tendency to refine and average microhardness value gradually increased. However, as the laser power and shielding gas flow rate increased, the microstructure became coarse gradually and average microhardness value gradually decreased.