Abstract:This paper is about metallic ultra-high temperature materials, in particular, refractory metal intermetallic composites based on Nb, i.e., RM(Nb)ICs, with the addition of boron, which are compared with refractory metal high entropy alloys (RHEAs) or refractory metal complex concentrated alloys (RCCAs). We studied the effect of B addition on the density, macrosegregation, microstructure, hardness and oxidation of four RM(Nb)IC alloys, namely the alloys TT2, TT3, TT4 and TT8 with nominal compositions (at.%) Nb-24Ti-16Si-5Cr-7B, Nb-24Ti-16Si-5Al-7B, Nb-24Ti-18Si-5Al-5Cr-8B and Nb-24Ti-17Si-3.5Al-5Cr-6B-2Mo, respectively. The alloys made it possible to compare the effect of B addition on density, hardness or oxidation with that of Ge or Sn addition. The alloys were made using arc melting and their microstructures were characterised in the as cast and heat-treated conditions. The B macrosegregation was highest in TT8. The macrosegregation of Si or Ti increased with the addition of B and was lowest in TT8. The alloy TT8 had the lowest density of 6.41 g/cm3 and the highest specific strength at room temperature, which was also higher than that of RCCAs and RHEAs. The Nbss and T2 silicide were stable in the alloys TT2 and TT3, whereas in TT4 and TT8 the stable phases were the Nbss and the T2 and D88 silicides. Compared with the Ge or Sn addition in the same reference alloy, the B and Ge addition was the least and most effective at 800 °C (i.e., in the pest regime), when no other RM was present in the alloy. Like Ge or Sn, the B addition in TT2, TT3 and TT4 did not suppress scale spallation at 1200 °C. Only the alloy TT8 did not pest and its scales did not spall off at 800 and 1200 °C. The macrosegregation of Si and Ti, the chemical composition of Nbss and T2, the microhardness of Nbss and the hardness of alloys, and the oxidation of the alloys at 800 and 1200 °C were also viewed from the perspective of the alloy design methodology NICE and relationships with the alloy or phase parameters VEC, δ and Δχ. The trends of these parameters and the location of alloys and phases in parameter maps were found to be in agreement with NICE.

Effects of boron and carbon on the oxidation behavior of a NbMoTaW refractory high entropy alloy

Mechanical properties and oxidation behavior of NbMoTaW x refractory high entropy alloys

Improving oxidation resistance of TaMoZrTiAl refractory high entropy alloys via Nb and Si alloying

Oxidation behaviour of Ti-V-Cr-Nb-Ta and Al-Ti-V-Cr-Ta refractory high entropy Alloys: Effects of Nb and Al Substitutions

Elemental effects on the oxidation of refractory compositionally complex alloys

Improvement of High Temperature Oxidation Resistance of Micro Arc Oxidation Coated AlTiNbMo0.5Ta0.5Zr High Entropy Alloy

Effect of Trace Boron Addition on the Microstructural Evolution and Mechanical Properties in Ti45al8nb2cr-B Alloys

Enhanced Strength and Ductility of Laser Powder Bed Fused NbMoTaW Refractory High-Entropy Alloy Via Carbon Microalloying

The Microstructural Evolution and Mechanical Properties of Boron-Doped Ti35Zr30V10Nb25 Refractory High-Entropy Alloy

Effects of Mo and Nb on the microstructure and high temperature oxidation behaviors of CoCrFeNi-based high entropy alloys

Investigation of elevated temperature microstructural stability and tribological behavior of Mo x NbTiZr refractory high-entropy alloy coatings optimized by Mo-doping

Effect of Al content on the microstructure, properties, and oxidation behaviors at 900 °C of (MoNbCoCrAlxSi0.2)70Ti30 refractory high-entropy alloys coatings fabricated by electron beam cladding

Effect of Y on the high-temperature oxidation behavior of CrMoTaTi refractory high entropy alloy

Effects of Cr and W in TiMoNb Refractory High Entropy Alloys

Effect of Mechanical Alloying and Sintering Behavior on the Microstructure and Properties of NbMoTaWRe Refractory High Entropy Alloy

High-Temperature Oxidation of NbTi-Bearing Refractory Medium- and High-Entropy Alloys

The Effect of Boron on the Microstructure and Properties of Refractory Metal Intermetallic Composites (RM(Nb)ICs) Based on Nb-24Ti-xSi (x = 16, 17 or 18 at.%) with Additions of Al, Cr or Mo

On the Surface Property–Oxidation Relationship in Refractory High‐Entropy Alloys

High-throughput experiment-assisted study of the alloying effects on oxidation of Nb-based alloys

Oxidation behavior of (NbTaZrW)C high-entropy carbide at 800–1000 °C

The effect of boron addition on the high-temperature properties and microstructure evolution of high Nb containing TiAl alloys